I am trying to replace my headlights in my cobalt. I am trying to figure out how to put them in. Someone told me that I have to take out the headlight but i am having trouble getting them out. What do I need to do?
There are 2 nuts at top of headlight..Loosen those, also remove plastic push in tabs from grill...after that You will need to pry the headlamp out.It will take a few mins.!! Do not repalce the bulbs w/ those "Blue" bulbs they last all of 2 months,Because of the daytime running lights.It takes the life out of the bulb cause they run hotter!
There is a ring on the back of the headlamp where the wires are connected to the bulb. you will need to twist it (it may seem like it does not twist but it will). once you do that you can then slide the buble assembly out and replace the bulb. And dont worry about which bulb you replace them with.
It simple there are 2 bolts near the top of the headlight. I believe they are 10mm. Once you have those out you'll need to pull out the pop-in studs in the grill. Use a flat head screwdriver. then just pull a little they should pop right out
4,336 views
Usually answered in minutes!
I need to change the headlight bulb
×