The procedure to replace the tail light is as follows:---
1) Open the trunk.
2) Push
the trunk fasteners in until it pops using a flathead screwdriver to remove the
lining and access the bulb sockets.
3) Remove the frame away from trunk and you will see the light bulb assembly.
4)Twist the bulb out of the assembly towards counter clock wise direction.It will come out.
5)To remove whole tail light assembly.Its connected with screws.Remove those screws and disconnect the wiring connector from its side and lift the tail light assembly out.
6)But if you want to only replace the bulb then no need to remove whole tail light assembly out.Just remove bulb and replace new bulb in reverse and install all parts in reverse.
--------------
This should help.Thanks.Helpmech.
117 views
Usually answered in minutes!
×