Hello Les Gray,
We "guys" (women are here too...) here at
FIXYA are
FREE VOLUNTEERS...
My
BEST advice to you is to hop onto whatever
payment method you used and get that
charge
REVERSED /
CHALLENGED pronto...!!
Get your MONEY BACK..
NOW.
I posted up your previous question...
There is no trace of a
FIXYA response...
& I highly confident no CHARGE...
(again... because FIXYA is
FREE).
~~
On your tranny question... You ought not be ripping
things apart without the
FACTORY GRADE manuals.
Those manuals will tell you what & when
PULLERS &
PRESSES CAN be used & what kind of
separators
must be used.
Been a long time for me... but everything was pressed
together... Unless you were CLEVER enough to
chill
the shafts... and
WARM the gear clusters...
Then you could literally drop the parts together
(
cold & warm means still be
handled ... bare hands).
Key tip:
Never apply force through a bearing and never let
the transmission hang its weight on the input or
output shaft...
(there are tiny (typically very FRAGILE bearings)
in the MIDDLE of those shafts).
That and
dropping any CASE part are the biggest ROOKIE
mistakes... (SHATTERS LIKE A CLAY POT).
Hope this helps...
Carnac the Magnificent
×