4 wheel drive clicksig in right wheel, does not go into 4 wh dr

http://www.usa1industries.com/
This link will tell you and show you.
The 5th letter in the VIN will tell you
R=2 wheel drive
V=4 wheel drive.

Look under the vehicle. If it has a driveline going to the front axle it is a 4x4.

Manually shift your transfer case into 2-WH and get your shifter fork replaced.

check shifting rod see if damaged.

The RAV4 is a 4 wheel drive vehicle.
All wheel drive is when all four wheels have power at all times. This can be permanent or manual engaged. Clutches are used to prevent tire damage.
4 wheel drive is when one set of wheels has power and the other two can be engaged manually or automatically.
You should use 4 wheel drive when in mud or snow and extra traction is needed. 4 wheel drive can not be used on dry pavement.

All Wheel drive, you have all four wheels working at once. Where four wheel drive you can turn off to 2 wheel drive.

1999 Rav4 has a 2-Wheel drive option. If you have 4-Wheel drive (check with dealer) there is no need to set it to 4-Wheel drive as the 4-Wheel drive mode is controled by the Powertrain Control Module (On-Board Computer) as needed.

hi they are both rear wheel drive, infact unless they are 4x4 all 3, 5,6,7,8 series BMW's are rear wheel drive..hope this helps

Check drive shaft bearings , may be worn or broken. Good luck and thanks for using FIX YA

your supossed to go in reverse first for a couple feet to lock it in try that

My son tracker o into 4 whdr. then jump out of 4 wh.dr. going down the road when he needs it.