2004 GMC Envoy Logo

Related Topics:

Posted on Jul 13, 2008
Answered

Losing power when the a/c is running

I just replaced my battery, and now when i have the a/c on, its wanting to lose power. I have a 2004 Envoy

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 3 Answers
  • Posted on Jul 18, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jul 18, 2008
Answers
3
Questions
0
Helped
1807
Points
3

Hi Deettec

your problem seems very easy :) hope this one work with your envoy. Just buy AC DELCO carburetor tune-up conditioner.

How you use it: engine running , AC off please

1. detached the big black airflow hose which is attached in the mannifold of the engine block.

2. ask your friend to step on the gas pedal and set the rpm steady in 2000 rpm only.

3. then spray vigorously in 8 seconds the inside circle opening of mannifold while your friend steady step on gas pedal with steady 2000 RPM only.

4. after you spray, let your freind continue on gas pedal with 2000 rpm for 15 more seconds.

5. attached back the airflow big black hose to the manifold and you are ready to roll with your AC on.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0answers

2006 gmc envoy loses power and stalls out
Read full answer
Be the first to answer Jan 13, 2014 • 2006 GMC Envoy
0helpful
1answer

2004 GMC Envoy thermostat replaced and now the dash vents are not working
When thermostat was replaced, the battery was probably disconnected and that caused the HVAC system to lose its calibration. To initiate the calibration properly, first set all HVAC controls to their OFF or CCW positions. Then disconnect the battery for about a 2 - 3 minutes, then reconnect. Do not touch any of the controls for about 2 minutes. If this does not fix the vent problem, you probably have a bad or stuck actuator, or a stuck vent door.
Read full answer
Sep 01, 2012 • 2004 GMC Envoy
0helpful
1answer

The engine light in the 2004 Envoy stays on and the reduced engine power light
You may need to find a different shop

Nothing showing up, is about as common
as any vehicle coming into a repair bay

They know you won't pay diagnostic time or believe
anything your told,so they sent you on your way
Read full answer
Jun 21, 2012 • GMC Envoy XL Cars & Trucks
0helpful
1answer

Power outlets for 2004 gmc envoy xl intermittently work
loose connection or you are overloading outlets,if your trying to draw more than 15 amps continiously i'd reccomend fused wiring back to battery or main fuse box
Read full answer
Nov 20, 2017 • 2004 GMC Envoy
0helpful
1answer

What causes my 2004 GMC Envoy XL 4.2L to Intermittently Stall No Codes
Check the oxygen sensors.
Read full answer
Mar 11, 2017 • 2004 GMC Envoy
0helpful
1answer

My 2004 envoy will not start. A couple nights ago the lights on the dash were going crazy on and off. I would lose power on the radio and the dash gauges would lose power (fuel, battery, water) they...
Check the connections at the battery. Loose connections or corroded connections will cause this same symptom.

It is not uncommon for side terminal batteries to also have a problem internally between the mounting button (the place that the cable end bolts to) and the internal connection to the battery.

What sounds like what is happening is the connection is good enough to power up a light load, dash lights, gauges, radio, etc, but when a heavy load is demanded the connection heats up and looses continuity.

I see this issue more on fords but I have seen a fair amount of GM's with this issue.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Read full answer
Jul 20, 2011 • 2003 GMC Envoy
0helpful
1answer

Hi I own a 2004 Envoy wondering if anyone could help me out here, when I turn on the AC the car shakes and feels like it loses power and the car shuts off automatically. But that's not all even if I...
motor mounts
Read full answer
Jul 11, 2011 • 2004 GMC Envoy
0helpful
1answer

P0410 Secondary air injection system fault, P0128 Coolant temp
most ecu controlled vehicles have a 'limp home'mode if 2 or more fault codes are stored,it is designed to get your attention before damage is caused and to get you to the nearest w.shop to fix,i would have codes cleared and retest vehicle,it is the cheapest and 1st option for any shop,some late models even have excessive mileage past service interval in the 'limp' program
Read full answer
Jul 24, 2009 • 2004 Chevrolet TrailBlazer
1helpful
1answer

ERRACTIC RPM
Clean your throttle body. Once the battery is disconnected and the computer reset, it no longer increases power to make up for a dirty throttle body. Get a $4 can of carb cleaner. If you go to a mechani9c they will tell you that it is the ac compressor.
Read full answer
Jun 07, 2009 • 2004 GMC Envoy
0helpful
1answer

ENVOY LOSES POWER AT HIGH SPEED
First thing I would do is replace the fuel filter. Could be clogging
Read full answer
Mar 25, 2009 • 2003 GMC Envoy
Not finding what you are looking for?

View Most Popular

2004 Envoy

  • Cars & Trucks

Related Question

2006 gmc envoy loses power and stalls out

  • 2006 GMC Envoy

Related Topics

356 views

Ask a Question

Usually answered in minutes!

Popular Questions

2004 envoy fuse box diagram

2004 GMC Envoy

Wiring diagram or fuse box diagram-2007 GMC Envoy Denali

2007 GMC Envoy Denali

2004 GMC Envoy XUV SLT

2004 GMC Envoy

Need wiring diagram for Gmc envoy stereo

2006 GMC Envoy

Replace thermostat on 2004 gmc envoy

2004 GMC Envoy

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2004 Envoy Manual

2004 Envoy

Loading...