My minivan sputters when trying to accelerate it has 85,000 miles. What could caise this issue I was told it could ne the throttle, plugs or air filter which was recently changed. HELP
I have a similar problem with my Mazda MPV 2000 which is more evident when climbing. My MPV has 200,000km and plugs and leads changed 50,000km previously..air filter just changed...heading for fuel filter nextI have a similar problem with my Mazda MPV 2000 which is more evident when climbing. My MPV has 200,000km and plugs and leads changed 50,000km previously..air filter just changed...heading for fuel filter next
My 2001 was just doing the same thing. Upon inspection, I found a vacuum hose broken. Taped it up with duct tape until the replacement came in. Under $20 for hose and new clamp. I also checked the routing of my plug wires and breakage. While replacing wires and plugs, I noticed the wires were plugged in incorrectly. Found the proper routing online and everything run great now. Slight whistling sound though, probably throttle body needs to be cleaned. Otherwise, no hesitation on idle or acceleration.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...
? 5:11
https://www.youtube.com/watch?v=kblzMLRJrok
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...
I've owned my 2000 MPV since new and in that time and 250K miles later I have replaced the radiator and water pump and overflow tank. I have never bleed the cooling system. I have encountered no cooling related problem. I live in south Florida.
you will have both a throttle position sensor and a peddle position sensor both fitted to your throttle ,the cars ECU must pick up both sensors so it is not doing so you may need to change the throttle body.as you can not just change the sensors on there own.
I'd check #1 spark plug.
Usually a misfire code "fix" is a spark plug, spark plug wire, or a coil pack / distributor.
Keeping it simple...I'd go with the spark plug first and then look at the condition of the wires.
well first what cause the starter to burn , will that was a problem why it would not start from first, but now after installing the new starter it should work , are you sure you battery is good now after installing the new starter. reply
TRY THIS. GO TO THE STATION YOU WANT. PUSH AND HOLD THE SELECTED PRE-SET BUTTON YOU WOULD LIKE TO PROGRAM. PUSH AND HOLD TILL THE DISPLAY OF THE STATION BLINKS OR THE RADIO BEEPS. IT WILL BE FOR A FEW SECONDS. TO CHECK, TO THE STATION THEN PRESS THE PRE-SET BUTTON TO SEE IF IT STORED YOUR STATION. LET ME KNOW.
I have a similar problem with my Mazda MPV 2000 which is more evident when climbing. My MPV has 200,000km and plugs and leads changed 50,000km previously..air filter just changed...heading for fuel filter next
wants to die when i asop
Did you change the fuel filter too?
×