2001 Ford Expedition Logo
Posted on Jul 08, 2008

9 codes on my diagnostic tool

I got the readings P0743, P0755, P1747, P0443, P1451, P0135, P0141, P0155 and P0161. My biggest issue is that I never had any reason to think there was a problem with the vehicle. I just got in it one morning and the check engine light went on and the overdrive light on the gear shift was blinking. I never had one issue prior to these lights that morning?????

  • 2 more comments 
  • Anonymous Aug 11, 2008

    I have the same problem
    \


  • Anonymous Sep 24, 2008

    My codes are P0743, P0755, P1747, P0443, P1451, P1409, P0135, P0141, P0155, P0161. The last 4 are Oxygen sensor heater circuits. The first 3 are trans codes. A mechanic told me that something in the trans is causing a short circuit causing current to backfeed into the O2 sensors causing these codes. The vehicle was running great and this just happened suddenly. The car has no power now and the OD light is flashing on the steering column as well. He said a piece of the torque convertor may have broken off and gone in the trans causing the short, I am pulling the pan today, any help would be greatly appreciated!.

  • trickhaworth Oct 13, 2008

    I dont know what the codes were when I had a similar problem, but the problem ended up being that the wire for the O2 sensor had melt against the exhaust and shorted out against the transmission case causing the trans to malfunction as well as the O2 sensor. This might be a good place to start checking, I wish I had since a $50 part cost me $400 to fix at the shop. Just a thought, good luck

  • Anonymous Mar 24, 2014

    Check engine light staying on and car hesitating when I stop or slow down. Auto Zone engine fault codes P0155, P0161, P0443, P0135, P0141 came up. Bought four oxygen sensors to replace them out if bad. Replaced two oxygen sensors and engine light went out. Engine light came back on and re-checked engine fault codes at Auto Zone. Now codes read -- P0443, P0141, P0155, P0161, P2195, P2197. Can you help? What do I need to do to get the engine light to turn off?

×

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 25, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 25, 2012
Answers
1
Questions
0
Helped
2286
Points
1

I hade the same problem and i read in the blog about the fuse # 23 being blown. i check it replace it and my t01 expedition work great againd.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Dec 21, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Dec 21, 2010
Answers
2
Questions
0
Helped
2458
Points
4

I have the same problem now did you find out what went wrong ?? let me know if you did

  • Anonymous Dec 21, 2010

    I also have this problem what did you figure out after ?

×

Ad

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 24, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 24, 2008
Answers
1
Questions
0
Helped
2286
Points
3

Did you ever get a solution for this? I am having the same problem, same codes!!!

  • holgerea Dec 03, 2010

    I am having the same problem, same codes!!!
    can any body help me please?

  • Paula Gorman
    Paula Gorman Jul 03, 2016

    Going to try fuse #23 and look at wiring harness. Exact same codes popped up out of nowhere..

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2009 Lincoln town car lots of codes

The P07** relate to transmission issues, the rest fuel/air mixture.
From what you have done so far, I recomend you take it to a garage for professional service.
If you replaced the O2 sensors with aftermarket ones, that is the first thing I would suspect.
1helpful
1answer

My 2000 F150 just passed emmsion 2 weeks ago let my son drive it started to run bad cheek engine lite came on codes were P0743,P0755,P1747,P0443,P1451,P0135,P0141,P0155,P0161and P1409?Help

with that many fault codes each one with an ECM as a possible cause , I suggest that you check items like battery voltage and charge rate, ground wires and terminals , harness connections at the ECM for water and corrosion
or substitute the ECM with a know serviceable unit to see if the fault codes come back
0helpful
1answer

My engine idles great but when i put it in gear it misses n bogs

You need a dealer, this is way over th ehead of a home mech.
1helpful
2answers

I had all these codes come up and i dont know what they mean. Dont think its good. P1747,P0743,P0750,.P0755 ,P0760, P0765 P1451,P0133, P0135, P0141. P0153, P0155,P0161, P1409, P0302, P0303, P0304, P0171....

looks like most of you trouble is the "oxygen sensor". it in the exhaust pipe, about $25 PLUS. Changing it may very well help most of your other code problems, I would start there, it is a simple fix, you then need to clear all codes and see what comes up after replacement. You may come out very lucky.
P01747 is transmission pressure control solenoid P01451Lack of Response From Passive Anti-Theft System Module - Engine Disabled P0743Torque Converter Clutch System Electrical failure.
Do the Oxygen Sensor first as go from there.
Good luck
0helpful
2answers

What do these codes from a 2001 Mercury Sable LS mean? p1747, p0743, p0750, p0760, p0135, p0141, p0161, p0720, p0755...My car wont shift-out & barely takes off. The check engine light is on along with...

My chech engine light was on after i got it back from the garage and it was the P1451 anti theft system module error engine disabled what does that mean? The light wasnt on when i dropped it off.
0helpful
1answer

My Mercury Sable 2000 will not shift farther than second gear. I have a list of error codes, but do not know where to start. Someone advised that it may just be a fuse. Any feedback would be greatly...

The car's computer has put it in "limp mode", which is a function that will allow you to drive the vehicle home or to be repaired. My advice is to take it to a transmission shop and have it tested before you do more costly harm.
0helpful
1answer

2007 lincoln town car will not start or run properly Fault codes P0102,P0135,P0141.P0155,P0161,P0403,Pp0443.P0743, P0755,P0962. Help?

I don't have access to my manuals right now, but do this - google "Ford DTC code P0102" and see what comes up. Then do other codes same way. You will be sure to gert ideas, especially if it is a help site. I'll check back & see how you are doing.

Report results & progress
1helpful
2answers

Check enegine light stay s on all the time, here are the codes im getting, if someone could tell me how to fix these that would be great. p0155 p0141 p0136 p0443 p1451 p0135 p0161 p1409

P0155: O2 Sensor heater Circuit Malfunction (bank2 ) Sensor 1.

P0141: O2 Sensor heater Circuit Malfunction (bank1 ) Sensor 2.

P0135: O2 Sensor heater Circuit Malfunction (bank1,Sensor1)

P0136: O2 Sensor Circuit Low voltage (bank1) Sensor 2.

P0443 : Evaporative Emission control System Purge control valve.

P1451: Eavporative Control System Canister vent solenoid Circuit Malfunction.

P0161: O2 Sensor Circuit Low voltage (bank2,Sensor2)

P1409: Electronic Vacuum Regulator (EVR) control circuit malfunction.

change the O2 sensors first,Then check the the EGR Vacuum regulator for any Malfunction. Good luck
Not finding what you are looking for?

2,296 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...