2003 Chevrolet Silverado 3500 Logo
Posted on Dec 29, 2010

On my 2003 Silverado 3500 diesel the oil pressure guage reads zero. I've replaced he sending unit on engine and it still reads zero. I think I may need to replace the whole instrument cluster. if so, where could I purchase one?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Mar 03, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Mar 03, 2011
Answers
1
Questions
0
Helped
307
Points
1

Try replacing the stepper unit. the cluster pulls out in minutes. desolder the old stepper unit and solder in the new unit

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Oil sending unit location on 2005 Chevy 6.0 silverado 3500

The oil pressure sending unit is on the top, rear, driver's side of the engine.


25501968-3ficdobhz0qhby4bwsycnu4c-2-0.gif
1helpful
1answer

Oil pressure guage is stuck on 80 lbs 2003 silverado 4.8 liter

It could be your oil pressure sending unit is sending a steady signal because its defective. If it is, they are very simple to replace.
6helpful
1answer

Oil pressure gauge is reading 80 psi. I had the

The oil sending unit is located on the engine block behind the drivers cylinder head area.You have to climb up on the motor to see it cause it is hard to see behind the wiring harness.You may also want to purchase a new sending unit because it is very long and you might need to buy the sending unit socket to replace it.Hope this helps.Good luck.
5helpful
1answer

Just started up my 2003 chevy and my oil gauge went to 80

the oil sending unit could be out or the pressure guage is malfunctioning is the service engine light on?
0helpful
3answers

Oil pressure on a 2005 chevy 2500 8.1

your oil sending unit in the block is bad
0helpful
4answers

Oil guage quite working

Hi, this is a pretty common problem on these Silverado instrument clusters. We can repair it for you or provide you with the parts to do it yourself. Click here to learn more about these silverado instrument cluster problems:
Dr Speedometer Instrument Cluster Repair Speedometer Repair Guage...
2helpful
2answers

I own a 2003 chevy silverado diesel dullay 4x4 and none of the controls work for the passenger side window, I need a wiring diagram.

Hi I have a 4x4 2003 chevy 3500 silverado dually with dual tanks
rear tank stoped pumping into front tank and was full . I siphoned the fuel out of rear tank and fuel gauge reads 9/16 full . is there a way to reset the fuel sending units so they can calculate the fuel readings. I always filled the two tanks with the same amount of fuel
until now ? I'm thinking there is a inkine fuel pump
0helpful
1answer

1998 dodge 3500 check engine comes on

have the engine oil pressure checked with a mechanical guage, if it is about 15 PSI hot replace the sending unit for the guage, u will need to buy a special deep oil pressure sending unit socket for this job, they are made by KD and Lisle tools, they can be bought at NAPA.
Not finding what you are looking for?

317 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...