SOURCE: Car Bonnet Protectors.
Try contacting a company such as Lebra on this. The company has been around for a long time and should be able to help you out. Make sure you give them all vital information on your car,such as whether or not it has foglights or a ground effect package. They make one style that just covers the first few inches of your hood, and another one that covers the entire nose of the vehicle.
SOURCE: hyundai lantra sportswagon 2000 owners manual
Ebay is your best bet, might also try craigslist, etc. I know for most cars you can also get a shop manual on Ebay that will include details on maintenance for most if not all of the car.
SOURCE: Topping up gearbox oil on 99 Hyundai Lantra (manual)
You can actually do it from the top if it is similar to a 2001 Elantra??? On your right center of the tranny, there should be two big bolts I believe a 17mm one on the bottom left the other top right of the other. The bottom left is the drain plug the top right is where you fill it. If you want to make things easier you can remove the air cleaner and the air cleaner housing then unscrew the sensor on top of the tranny you can poor it in from the top. You will need to then unscrew the fill hole (Top right bolt) Pour the lube in to the hole where you had taken out the sensor until it pours out of the fill hole. Sounds like more work but by doing this you will avoid making a mess trying to fit the squeeze bottle into the tiny hole. Hope this makes Sense????
SOURCE: torque wrench settings for 97 hyundai lantra 1.8
They use throw away bolts. One use only, so don't reuse your old ones. You will need new ones. The smaller bolts 1st torque setting 22Ft/Lbs and the larger 26ft/lbs, the 2nd torque setting 60 degrees both bolt sizes and the 60 degrees for the third.
134 views
Usually answered in minutes!
×