1. Remove front wheel well front half splash guard, each side. There are about 2 screws and the guard pulls forward to seperate from the rear half.
2. After removing the splash guard, you can access one screw that attaches the front fascia, each side.
3. Then about 6 plastic push pin type screws along the bottom, underneath.
4. About 5 push pin type screws on the top.
5. Fascia should then simply pull forward. It is a bit bulky and an extra pair of hands is helpful.
6. Then there are 3 screws to remove the headlamp assembly. Unclip the wiring harness.
7. Then 4 screws to remove the bulb access cover plate.
yeah its a pain to change them bulbs but its the only way unless you pay dealer to do it for 200 dollars check your transmission fluid also make sure your car warms up some before you pull away your transmission fluid may be getting old causeing some circulating issues good luck
×
224 views
Usually answered in minutes!
The procedure for replacing the low beam bulb is in the owners manual with pictures
×