Hi Planeman.
Why is the heater in my car not working?
Ken Mattson, owner of Len's Automotive in Bellevue, Wash., says a car heater can stop working for a number of reasons, including: A low antifreeze/water level in the radiator due to a leak in the cooling system. A bad thermostat that isn't allowing the engine to properly warm up.11 Dec 2013
Why Isn't My Car Heater Working? ' Angie's List
https://www.angieslist.com/articles/why-isnt-my-car-heater-working.htm
Search for: Why is the heater in my car not working?
Why is my car heater not blowing hot air?Hot coolant from the engine passes through a heater core, which looks and functions a lot like a small radiator, and a blower motor forces air through it. ... It's also the reason that a plugged heater core, stuck thermostat, or air in the cooling system can all cause a car's heater to blow cold.9 Jul 2017When Your Car Heater Blows Cold Air - Lifewirehttps://www.lifewire.com/when-your-heater-blows-cold-air-534667
How do you fix the heat in your car?Begin with the vehicle on level ground, engine off (cold) in park with the emergency brake set.Heater Controls. Step 1 - A heater cannot operate unless the engine is full of coolant/antifreeze. ...Refilling Cooling System. ...Engine Thermostat. ...Blend Door Actuator. ...Broken Vacuum Line. ...Heater Control Valve. ...Vacuum Gauge. ...Heater Core.How to Fix a Car Heater in Under 30 Minutes - 2CarPros
What are the symptoms of a bad thermostat?A motor with a bad thermostat will run fine for the first few minutes, then overheatrapidly. Other symptoms include the engine and radiator making a rumbling, gurgling, boiling sound: like a steam pipe knock, if you've ever heard one of those. A thermostat sticking open can make your heater not work in the winter.Auto, Car, Truck THERMOSTAT Repair bad thermostat symptoms
or go to this link if you need more help.
2008 ford ranger has heater that won get hot Google Search
SOURCE: shifter knob removal
the shift knob is glued and pressed on, the best way to remove it intact is to heat the knob with a heat gun and pull straight up with a lot of force, please be very careful because when the knob finally releases there is very good chance that you can hit yourself in the face, if the knob is not to be used again you cut a **** up the side with a dremal tool,
SOURCE: Heater only blows hot (well, warm) on full speed of fan
Replace the temp control on this car, it should be electrical control not cables.
SOURCE: No heat in my 2000 GMC Sonoma w/AC. Engine warms
that year / series of GM sonoma and s-10 where famous for having clogged heater cores - is temp of hoses going in and out the same ? if not try to flush out ther core, if they are, ck to see if the hot water valve is woking, and finally operation of the doors inside the heater box itself
Testimonial: "Success! Reverse flushing heater core fixed problem. Less than a tablespoon of dirt came out yet it gave no heat. Now works great. Thanks much. Jim."
SOURCE: 05 ford ranger 3.0......if I put my thermostat on
Cold air like, really cold or just cool. Sounds like your hot/cold blend door motor has perhaps failed with the blend door in the semi hot position. Blend door motor failure is very common on the Ford truck HVAC systems. Is is located behind the glovebox on top of the HVAC housing assembly.
SOURCE: 2008 ford ranger heater only
08 Ford Ranger 4.0 same problem but it is vacum not electric no vacum on hose in cold or hot position thought maybe valve but that's not the problem . There is no vacume to make valve work:(:(
764 views
Usually answered in minutes!
×