At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a fuel injection module under the dash.if you,remove the module and check the circuit board it will have broken solders in it. our shop has fixed alot of those..a hayne smanual will show you how to take it out....sorry i do not reply.
Code 13 Barametric pressure sensor. ECM uses it for fuel mixture and timing.It is a wht 3-pin harness connector Baro-sensor is located under dash on passenger side make sure if there is a hose that it is attatch other than that you need this sensor
These three websites should help you out tremendously with your third generation Honda Accord. According to the top two forums, there is a box under your drivers seat which you will need to access from the back of the seat by folding it up and sliding it forward. There should be a small hatch on the box. Behind the hatch are some LED lights that will be blinking if the ignition is on and the PGM-F1 light is still on. This sequence of blinking is a code and you will need a book for the car to tell you what this code means, or a dealer can tell you. This will let you know why the light is on and what needs to be fixed.
I recommend becoming a member of www.3geez.com as they deal specifically with the year range of your car. If anyone knows answers to your questions, they will.
Do your high beams work? The problem could be your turn signal/high beam switch. If the lights come on when you use the high beams replace this switch. It is available at most autoparts stores. Not a diffucult repair probably under two hours.
×