2003 Oldsmobile Silhouette Logo
Posted on Jul 01, 2008

Auto traction and cruise control problems

I have a 2003 Oldsmobile Silhouette and one day the service light for the auto traction came on. The traf off light also came on. This happened a few times and has not come on since. And I did notice that the cruise control stopped working after that. Any clue?

  • Anonymous Feb 07, 2009

    2004 Olds Silhouette -- service engine soon light came on whilst cruising down the highway. Shop replaced the thermostat. Now the cruise isn't working!

  • grasley Feb 08, 2009

    my issue is the auto tyraction light is on and it is not working

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Sep 04, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 04, 2009
Answers
1
Questions
3
Helped
1519
Points
7

Just replaced both front bearings on my 2000 olds silhouette, the traction control light / ABS light is still on. What do i do?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The service traction light keeps coming on and abs light as well how do i fix the traction light

I have the same problem few days ago, and still didn't find any solution. Can any one please help?????20
1helpful
1answer

I have a 2002 silhouette and the Service Traction System message displays in the message center and the Traction System is turned off upon start up. After driving a few feet the message goes off but the...

Unsafe to drive the van - probably not unless you are relying on the traction control system. There is an issue somewhere with the traction control system that needs to be diagnosed and repaired. Generally this requires special tools that your local trusty auto repair facility should have. They can help diagnose the issue and recommend a course of action for you.
2helpful
1answer

1999 Oldsmobile silhouette brake light and tcs

check the abs sensors common to hit or damage the wiring or knock connection loose when doing a brake job the traction control system[tcs] is tied into the abs system
0helpful
1answer

I have a 2001 Oldsmobile Silhouette and the traction active light comes on and makes a growling noise when you begin to take off and turn the steering wheel. How do I solve this problem?

the traction control system watches wheel speed thru the wheel speed sensors. it was designed to aid in traction in slippery conditions. when one of the wheels loses traction and the system sees an abnormal insrease of speed in one of the wheels the system will activate and derate the power to avoid wheel slippage. going around a corner the outside wheel will spin faster then the inside wheel. under normal acceleration nothing will happen, however under heay acceleration you may be causing a wheel to break free, especially on wet roads. you could have a speed sensor problem but i would expect you would also have an antilock problem. try a slower acceleration around corners then try a heavy acceleration, if it was ok on normal acceleration but activated on heavy acceleration then your going to have to lighten up on the pedal a bit. otherwise the system should be scanned for codes. i never liked this system much and it wasen,t around too long. good luck!
5helpful
1answer

My ABS and Service Traction Control system lights are on. What could it be?

those lights come on when the system is shut down by the computer. You have to scan the abs system. It is usually one of the sensors. I have seen many of the front wheel bearings being the problem because the sensor is built in and when the bearing goes bad.

The ABS and Traction control both work off the abs system .

Hope this helps.
2helpful
2answers

1999 oldsmobile alero the traction and cruise not working

use a scanner to check the abs system . most of the time the abs brakes and traction control system work together. your cruise control . unit has a servo motor .in front right fender well. check the fuse and relay also the cruise control brake release switch. and the brake light switch.if all is good you have a cruise control module problems. dealer ship job.
0helpful
1answer

Service traction system light on after getting new tire

wheel bearing about to go bad.. Notice any slight roaring noise??
1helpful
1answer

Traction light stays on as well as my abs would come on and stays on and clicking noise during braking.

Sounds like you have a problem in the front brakes or a front wheel speed sensor. A common cause for a Traction light is a faulty front ABS wheel speed sensor or harness. When the Anti lock brake computer sees a problem in the ABS syetm, it disables traction control as well.
3helpful
1answer

2002 Oldsmobile Silhouette ABS Light is on and

The first thing i would check is all 4 abs sensors at the wheels.You can do this with a volt meter set on ac voltage and spin the wheel if it generates voltage at all on the meter its good.
10helpful
2answers

2001 oldsmobile silhouette traction corntol is off and ABS light

I agree with the post about the tail lights. And the symptom about the brakes on when starting was also helpful. When I took off my rear tail lights and removed the top light bulb (top of the 4 is closest to connector) then repeat starting the car the problem is gone. I have a whole drawer of these bulbs that I removed, not because the filament was burned out, but because the base (similar to circuit card edge connector) had heat damage and melted. I am not sure exactly what the problem is but I think there are multiple conductors in the fixture which are too close or get moisture shorts. Anyway I hypothesize the circuit for daytime running lights is leaking current into the brake light circuit, and it causes that module that controls traction control and ABS to declare a fault. When you start with foot on the brakes the brake lamp is pulled on (I don't know if switches hi or lo) so that module doesn't declare the fault until you release the brakes.

I put in new bulbs and it works fine for now, but I know it may reappear some day then I will repeat, disassembly of the fixtures and inspect bulb bases for heat damage and clean out and replace. That is what did the trick for me.

Thanks Fixya and all contributors
Not finding what you are looking for?

1,529 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...