Does anyone know the firing order on a 1989 Chevrolet Corvette?

Question edited for clarity.
Question moved to Corvette sub category.

Removing one of the fuses disconnected the anti theft module.

https://www.google.com/search?q=1989+Chevy+Corvette+reset+security

..

The dist. is a half tooth off location. Pull the dist. an reset timing. Be sure #1 cyl. is at the top and the rotor is pointing to #1 in the cap. or firing order.

1984 Chevrolet Corvette 5.7L TBI 8cyl

The Firing Order
Firing order 1-8-4-3-6-5-7-2 ---------front ' 2 4 6 8 ' of ' ' Distributor rotates clockwise vehicle ' 1 3 5 7 ' ----Here's a video on your firing order. firing order of 265 to 350 chevrolet smallblock v8 animated here's another link. The fire order and on 84 cross fire corrvette please show diagram of of...

The only part that would come to mind after all of this would be the fuel pump relay. This is located on the fire wall on the drivers side of the car. When that goes bad it does not allow for adequate fuel to cycle through.The other thing would be timing. You need fuel air and spark for the vehicle to fire. After all the test and after replacing the fuel pump relay. I would do a compression and a leak down test. Are you sure that the timing did not jump a gear? You can also look and test the IAC (Idle Air Control) or the MAF (Mass Air Flow Sensor). Also do a test to check fuel pressure. The last Corvette that I worked on personally that had this issue it turned out to be the Fuel Pump Relay. Good luck let me know if you have any further questions.

1966 - 1969 with 4 Barrel Carb (L36)
(Low Compression Model)
Max Brake Horsepower - 390 @ 5200 rpm
Max Torque - 470 @ 3600 rpm
Stroke - 3.76
Bore - 4.251
Compression - 10.25
Firing Order - 18436572

1966 with 4 Barrel Carb (L72)
(High Compression Model)
Max Brake Horsepower - 425 @ 5600 rpm
Max Torque - 460 @ 4000 rpm
Stroke - 3.76
Bore - 4.251
Compression - 11.0
Firing Order - 18436572




283, 327, 396, 409 and 427 CID Engine 1965-1966
Firing Order 1-8-4-3-6-5-7-2




350 CID Engine 1969-1974 Corvette, 427 CID Engine 1969 Corvette
Firing Order 1-8-4-3-6-5-7-2


Hope this helps (remember to rate this answer)

HI. This pictogram will help you with your firing order for your 77' Corvette.(350).
Great Car!

next project- bought repair kit from zip vette parts-let U know when finished

For the 1989 Chevrolet Celebrity 2.8L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back).......
|...1....3....5...|
|...2....4....6...|
......(front)

Ignition Coil Connections:
...............(back)
....1...4........6...3.......2...5...
.|..o...o..|..|..o...o..|..|..o...o..|
.|....O....|..|....O....|..|....O....|
...............(front)

Let me know if this helped, or if you have additional information of questions. Feel Free to contact me at FixYa.com!

Look for anything that could still be on trunk light hood light dome light any add on amps or lighting or exterior marker lights ! could also have a cable grounding out on something!!swampratt200!!AAAEE!!!

Fig. 1: 5.7L (VIN 8) Engines Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: clockwise


Fig. 2: 5.7L (VIN J) Engines Engine firing order: 1-8-4-3-6-5-7-2 Distributorless Ignition System

Hope this helps and have fun wrenching on that vette!!