The VSC has no disable switch. This is a problem is the VSC prevents you from rocking the car stuck in the snow. Other than doing the "pedal dance" does anyone have a way to install some kind of disable switch. My older Toyota Camry came with a factory installed disable switch which leads me to beleive there is a way to simply install a switch. Anybody?
SOURCE: VSC Trac off lights on dashboard
My VSC, TRAC and Check Engine lights came on in my 2001 Sienna. I found the brake fluid level to be low in the reservoir. Filling it solved the problem.
SOURCE: 2003 Toyota Sequoia 4WD
Looks like you have a bad wheel speed sensor. But, you will have to get them scanned to determine which one is not being read by the computer.
SOURCE: I can't disconnect my '98 toyota camry car alarm.
BEHIND THE DRIVERS KNEE PANEL IF IT IS FACTORY IT SHOULD BE JUST BEHIND THE DUCT WORK YOU CAN ALSO JUST UNPLUG THE PIGTAIL HARNESS IN BETWEEN THE IGN. SWITCH AND THE ALARM (PLEASE RATE THIS)
SOURCE: how to install control arm bushing in a 1998 toyota camry
Which one and why? If you have noises, it's not the lower control arm bushings. All these Camrys need rear sway bar bushings for the noise in the rear. For the noises in the front you'll need new strut mounts and the transmission mount that is on the far left hand side, in front of the driver between the frame and the end of the transmission housing. Any other bushing please specify and I'll tell you how to do it.
164 views
Usually answered in minutes!
I have a 2005 Avalon XLS
×