Air idle control valve, I dont belive you have a ideler set screw..I do belive the problem is what I have Listed..........Best of luck
How can I tell if I need a new air idle control valve?
If your car has a rough idle or the idle cycles up and down, then chances are that you have a bad idle control valve. On modern vehicles, the purpose of the idle air control valve is to regulate your idle, and keep the idle smooth. The idle valve is controlled by the ECU or the computer, and when in gear the idle should be between 800 and 1000 rpm, and not in gear, between 700 and 900 rpm
Just as a note. The proper way to adjust the idle is by correcting issues with the engine
The computer is designed to properly adjust the idle on vehicles. So you have a sensor or device issue with your car. Could be the egr system, or the Idle Air Control, or the throttle position sensor.
There IS an idle screw, but do NOT mess with it. To properly adjust the idle you must disconnect the SPOUT connector then adjust the base timing and idle. If you don't have the repair manual for your vehicle I highly suggest you get one if you are going to be working on it yourself....
2,220 views
Usually answered in minutes!
×