1994 Saab 900 Logo

Related Topics:

Posted on Nov 18, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Saab problems Well when I start the car up, the brake fluid light comes on and the anti lock brake comes on. When this happens my windows don't go up or down and the seat doen't work either. Sometimes the the brake fluid light and the anti lock brake goes off and then all the electrial things work again. Can you help me fix this problem?????

1 Answer

A Hoffman

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

  • Saab Master 313 Answers
  • Posted on Nov 20, 2017
A Hoffman
Saab Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

Joined: Jun 02, 2016
Answers
313
Questions
1
Helped
156927
Points
1043

Check that battery is above 12V and that alternator is putting out 14V.

4 Related Answers

Anonymous

  • 83 Answers
  • Posted on Mar 25, 2009

SOURCE: I have a 1997 saab convertible need help with putting top down

The handbrake must be on.

Ad

Anonymous

  • 477 Answers
  • Posted on May 05, 2009

SOURCE: Window wiper problem

Hello I have a saab 9.3 SS 04 and had the same problem.

- intermittent wipe doesn't work, at all
- windscreen washers don't work, at all
- "normal" continuous, and fast wipe work, but the wipers
freeze in the middle of the windscreen if you let go of the
control stalk, rather than sweeping back to the resting position
- same "freeze" happens with the manual wipe (push down on the control stalk)

The weird thing is that, this morning, for about 10 minutes, it seemed to fix itself,
partially - the washers started working etc - but the intermittent wipe still didn't work. However not long after that it went back to the symptoms described above.
also if I unplugged my car battery for a minute the washers worked for several seconds but again same problem occurs.

Solution is to replace your wiper motor. its that "simple"
worked for me. The wiper motor has a lot of electronic stuff and seems to control the washer engine.
Good luck.

Anonymous

  • 1 Answer
  • Posted on Oct 07, 2009

SOURCE: 95 saab 900 turb0 gauge cluster works intermetanly

I have this problem too and my new Saab mechanic told me that I would probably need a new instrument cluster. He said a brand new one costs $2500 but that he would order me a used one from a car that had fewer miles than mine as you can set them back but not forward. He both diagnosed and temporarily "fixed" the problem by slamming his hand really hard on the dash over the panel and all the lights and gauges immediately started working fine....for now. I haven't had the work done yet (I have a 1998 Saab 900S with 130K) so if anyone has any other ideas about this I would love to know what they are. This issue with the gauges and dash lights has been happening on and off for over a YEAR and this is the first time someone has had any idea what it is. I already had my ignition switched replaced so we know that's not what it was. THANKS

Anonymous

  • 1608 Answers
  • Posted on Mar 16, 2010

SOURCE: anti lock brake light on brake fluid is fine

The fluid being low will not cause the abs light to come on.You have to get the codes read to find out what is causing the light to come on.Usually a wheel speed sensor or wiring.If you don`t get the code you won`t find the problem.There are 4 wheel speed sensors.So get the code and save yourself some time and money.Hope this helps.Good luck.

Testimonial: "this was very helpful, im very glad i found this site. hope i can help someone else out sometime. thank you"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Anti lock brake light and traction control light come on when starting car.

Typical issues to cause this fault would be:
1) Steering geometry is out and requires realignment.2) ABS sensor in hub is faulty.
0helpful
1answer

(!) with a squiggly line in-between 2008 dodge caravan

Sounds like a brake light. Check your brake fluid and fill to the correct level if low then see if it goes out.

The Brake light says "BRAKE" is the Brake System Warning Light: "This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system (if equipped)."

Another is the Anti-Lock Brake System Light: "This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on."

It could also be the Tire Pressure Monitoring light. Check the brake fluid first and see if that fixes it.
0helpful
2answers

I have front brakes but no rears this is on a saab 9000cdturbo withaccumulator boosted master cylinder

CHECK BRAKE FLUID FIRST IF ALL IS GOOD. YOUR PROBLEM COULD BE IN THE HYDRALIC CONTROL UNIT OR MASTERCYLINDER AND THE CAB OR CONTROLLER ANTI LOCK BRAKE.THE CAB IS THE BRAIN FOR THE ABS UNIT IT CONTROLS SOLENOIDS TO FRONT AND REAR BRAKES.HAVE ABS BRAKE SYSTEM CODE SCAN FOR A FAULT CODE.
0helpful
1answer

Abs anti-locking faulty light came on filled brake fluid so how do I reset the warning light truck won't start till I reset code

The anti lock brakes have nothing to do with the truck starting.I believe you have 2 different issues.What you need to do is see if your getting fuel pressure.If your getting fuel then you need to check and see if your getting spark at the spark plugs.As far as the ABS you need to get the codes to see what is causing the light to come on.The only way to clear the codes is with a scan tool.But it has to be repaired first or the light will come back on.The fluid being low will not make the ABS light come on,just the regular brake light.Once you get the codes just post back with the year and motor of your vehicle and I can help you out with your problems.Hope this helps.Good luck.
2helpful
2answers

Anti lock brake light on brake fluid is fine

You could have a bad wheel speed sensor, or the wiring to it. Also the control unit. I would see what codes are associated with the light, that will pin point the problem, with a fault code. You'll need a code reader.
1helpful
1answer

2001 Alero - anti-lock brake light warning light won't go out - had brakes replaced - is there a re-set button?

no reset button.have the car anti-lock brake system scanned.to check code.because when anti - lock brake light come on.it can be many things.like faulty wheel sensor.faulty relay or the anti - brake unit low on brake fluid or the abs unit faulty.
0helpful
1answer

What does the anti lock light on the dash mean?

The anti-lock light is indicating that your anti-lock brake system has a problem. Check fluid level. Could be a sensor, time for brake service etc, but I wouldn't wait too long to have it checked, just in case something serious. Anti-lock brake problems may cause a wheel or more, or all, to lock up in a panic stop situation. When was last service on brakes done?
0helpful
1answer

L992 town car. anti lock brake light is on. what could be the problem. brake pop up after being pressed,

did you check your brake fluid and if its not that the anti-lock light by itself wont hurt the car but the brake light coming on check your brake line hoses and see it they have ony holes in it also check out your brake resvoir and then your master cylinder all of your brake systems is connected together
0helpful
2answers

Break light....

There's a switch on your emergency brake that the indicator (on your dashlight) operates from. Sometimes it slips in its bracket and gets out of adjustment causing your dash light to stay on. Its located on the upper part of your emergency brake pedal. Hope this works for you. Goodluck.
Not finding what you are looking for?

85 views

Ask a Question

Usually answered in minutes!

Top Saab Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...