WASHER MOTOR
1.
With the washer motor installed to the washer tank, fill the washer tank with washer fluid.
2.
Attach the positive (+) lead from the battery to terminal 2, and negative (-) lead to terminal 1.
3.
Check that the washer motor runs and washer fluid is ejected.
SERVICE ADJUSTMENT PROCEDURES
1.
Check the washer fluid contact point.
2.
Adjust the washer fluid contact point by using a metal wire to move the washer nozzle ball.
SOURCE: where is the windscreen washer bottle for a FIAT SIENTO
It'll be located near the front end of the car... black cap with a white tube
SOURCE: How to clean the windscreen washer jets.
The best thing to do with this problem is to replace the jets its very easy and they only cost about £3 a pair. Just pop out the jets with a small driver pull the jet from the pipe and replace with new jets.
SOURCE: Hyundai Santa Fe Windscreen Washer Motor Fault
try taking a pin and cleaning the holes on the squirters and if that does not work check the washer pump it is located on the washer fluid tank
SOURCE: '97 Audi A4 windscreen bottle leak.
I would look take off the front bumper wrap and see if there is a leak somewhere in the plumbing to the headlight washers, etc. I had this problem.
SOURCE: Peugeot 407 not 405 blocked windscreen washer
its in the pump it self mate ya have to take the pummp out of the bottle
1,312 views
Usually answered in minutes!
wiper,s work water in tank no noise from motor when switch is pressed
fuse ok jets clear .....cant find pump to check if motor is broke. hyundai coupe 1998 s reg
Windscreen trim
×