SOURCE: oil sending unit on 2004 chrysler sebring V6
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
SOURCE: 2004 chrysler sebring transmission was leaking but now has stop
Keep a close eye on the level, and watch for drops in driveway etc. Even try placing something under the transmission area if you have to, like cardboard or plywood. Good chance it didn't cure itself, but stranger things have happened I guess. Hope you used Mopar transmission oil to re-fill it. believe it or not, I don't work for Chrysler but have heard many a story about chrysler transmissions acting up because of wrong fluid in them, even when lube places tell you it's o.k to use something else. Just a heads up.
SOURCE: How Do i Remove Dash Board Speakers From A 1997 Chrysler Sebring
all u do is pop them out, they pull upu may need 2 use a screwdriver or something to get them started, then u follow the wire down and theres a lil connecter u can pull
SOURCE: I can't locate the fuel filter on my 2004 chrysler
I would check if it is in the gas tank on that model. you can go to your local parts store and they should be able to inform you of this.
SOURCE: 2004 chrysler sebring idle speed is too slow. HOw
why do you want your rpms higher while idling? you don't want them high because your gas bill will reflect that. slow shouldn't matter but if it's dying while on idle it could either be your mass air flow sensor or your fuel filter being clogged
565 views
Usually answered in minutes!
×