Turn signal and hazard lights on my 96 maxima will not work, what can it be?

SOURCE: Hazard Lights Won't Work on 96 Taurus

FIRST Check for Blown Fuse Then Locate Flasher Units @ Fuse Block to Determine Wiitch one is Hazard Turn On Key Then Turn Syg. Feel Flashers The One you feel Clicking is For Turn The Other IS Flasher Replace this Flasher unit.

1. Verify the customer's concern by operating the turn signal/hazard flasher lamp to duplicate the condition.
2. Inspect to determine if one of the electrical concerns apply: VISUAL INSPECTION CHART Electrical

• Circuitry open/shorted.
• Fuse junction panel Fuse:

• Damaged multi-function switch.
• Miniature bulb burned out.
• Damaged lamp.

1. If the inspection reveals obvious concern(s) that can be readily identified, service as required.
2. If the concern(s) remains after the inspection, determine the symptom(s) and go to the Symptom Chart. See: ProceduresSymptom Chart(s)

SOURCE: hazard/turn signal switch

need to replace the whole switch/stick at steering column.

SOURCE: My 96 ranger turn signals & hazards don't

It Could Be The Flasher Switch Or Turn Signal Switch Now This May Not Be Whats Wrong with Yours Now My Ignition Switch came Apart on my car and i lost turn signals and E flashers i hope one of these will help

SOURCE: 96 Ford Taurus no turn signals or hazards

Take the turn signal lever and jiggle it, a lot. If they start working, the switch is bad. You can also turn on the hazards and take hold of the button and push it left , right , forward and back and see if they start working. If so, replace the turn signal/ hazard switch.

SOURCE: 1999 Camry Turn signals and hazard lights not working.

located on the firewall panel on the left side of the floorboard on the drivers side