1997 Ford Expedition Logo
Posted on Nov 25, 2010
Answered

I need to know how to get the drivers side door panel off. My window is off track and I need to fix

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Dec 04, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Jul 07, 2010
Answers
1
Questions
0
Helped
507
Points
1

How to remove door panel on a 97 expedition, pull up on master window switch bezel careful clips break easily and unplug the connectors, remove triangle trim piece top right side of panel pull out then up, screw behind it remove it, remove red lense plastic piece on bottom of door small screw driver careful breaks easily screw behind it remove it, remove bezel around door handle turn it to get off handle screw behnd it remove it, pull straight up on door handle gently then hard if needed, after it is loose from door remove light bulb socket from behind door panel turn it, unplug power window switch.
thats it reverse to put back on

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?
R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck
Read full answer
Sep 14, 2014 • 2003 Nissan Altima
2helpful
2answers

1991 oldsmobile cutlass supreme drivers side window keeps coming out of track, how do I fix
Hi,
generally the door panel has to come off. With the panel removed you can see the tracks. There is an adjustment for each track, and you can observe the action of the window in the track as you operate the window. slacken both track adjustment bolts if fitted, operate the window untill fully up, tighten each adj bolt and operate the window through the cycle. Make any further adjustments as needed. When correct install the door panel, and recheck the operation of the window.

Good luck.
Read full answer
Jan 31, 2011 • 1991 Oldsmobile Cutlass Supreme
0helpful
2answers

My driver side window will not roll down properly. I stops about half way and seems to bend inward toward the car instead of going down further. I have taken the door panel off and can not tell exactly...
remove the door panel. it may have come off track. go to any auto parts store and buy a haynes manual for your specific car. they are based on a complete teardown of vehicle. this book will show how to remove door panel. they are about 20 to 25 dollars.
Read full answer
Dec 15, 2010 • 1997 Dodge Neon
0helpful
1answer

Need to know how to replace driver window in 1988 bronco. window has a side vent.
you will need to take off door panel and roll the window down. You should be able to look inside and see the tracks it rolls up and down on. disconnect from tracks and pull old window out the top of door, slide new window in and hook to tracks, should be very easy to install on such an older truck.
Read full answer
May 18, 2010 • 1988 Ford Bronco
0helpful
1answer

How do I remove driver side door window
You need to remove inner door panel by unscrewing the screws on inner door handle and take a flat screw driver wedge it between the panel and door use flash light to see the clips along the sides and lower part of door and pry them free. then look through the inner door cut outs to find window track. Once you see it use ratchet or screw driver and loosen the window free form track. Then carefully remove window.
Read full answer
Apr 01, 2010 • 2003 Mazda MPV
5helpful
1answer

Drivers side window has slipped off track 2006 mazda mpv
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.
Read full answer
Sep 29, 2009 • 2006 Mazda MPV
0helpful
1answer

2005 Chevy Colorado window is off track
remove the door panel and check the operating mechanism ,bet that one of the fixings on the lower part of the window that lifts and lowers it is adrift
Read full answer
Aug 05, 2009 • 2005 Chevrolet Colorado
1helpful
1answer

Rear driver's side window is off track. i need to know how to remove the door panel to get back on track. window motor sounds like it is working in both directions 2001 hyundai sonata
Remove the upholster on the door panel. then, loosen the bolt of the window mechanism..and also the bolt of the track of the window, so you can put the window back on its track. then, you can stabilize it by looking for the right adjustment of the mechanism.
Read full answer
Apr 18, 2009 • 2001 Hyundai Sonata
2helpful
1answer

Window off track driver side 1997 sebring
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Read full answer
Mar 23, 2009 • 1997 Chrysler Sebring
0helpful
1answer

Driver side window is off track and stuck about 75% closed
If your power window motor is not moving up or down at all inside the door panel, you will need a new motor.
If your window is stuck and will not move, it is the motor - it is bad.
If your window falls down into the door panel, the window is off track.
Replacing a window motor is an easy fix, get another one from an auto parts store and replace it.
Good luck!
Read full answer
Mar 12, 2009 • 1993 Honda Accord
Not finding what you are looking for?

View Most Popular

1997 Expedition

  • Cars & Trucks

Related Question

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?

  • 2003 Nissan Altima

Related Topics

517 views

Ask a Question

Usually answered in minutes!

Popular Questions

Need firing order diagram for a 5.4 ford

2003 Ford Expedition

I keep getting the codes p2196 and p2198

2004 Ford Expedition

2003 Ford Expedition fuse box

Ford Expedition Cars & Trucks

2005 expedition fuse box diagram

2005 Ford Expedition

Electronic Throttle control light came on and car died

2005 Ford Expedition

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...