At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Acceleration trouble I have a 2000 hyundai accent, it is hard to start but after I get it to start it will idle normally but when I press the accelorator peddle it will it will start to accelerat normally but then will not add any speed. I can not get it to move at all. If I slowly press the accelarator it does nothing. Sometimes when a slowly release the peddle it will rev higher then go down. I think the problem could be with the throttle position sensor.
The harder you drive your car the quicker you wear out parts and
wearing out of parts causes decrease in performance.so technically yes
it does eventually "kill" it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is this poor acceleration something the car has just started doing or are you trying to upgrade for better than the normal acceleration? What exactly does it do when you try to accelerate? Do you have any warning lights on the dashboard? Have you had it plugged into an OBD2 scanner to look for trouble codes?
P0335 is your crank sensor, it is either on it's way out or is finished, it is essential that it be replaced or you will be stranded-not too hard to do if you are somewhat handy, part is usually not too expensive either.
you may have a safety switch attached to the clutch thats faulty,id start with the switch first its not real hard to replace its mounted to the clutch pedal bracket ,other than that it may be an ignition switch
ask hundai if there is a main relay. These are often the cause of this kind of problem and normally reside under the dash.
This is common in Honda, Accura, toyota and huyndai.
Replace main relay or take it apart and resolder all connections.
×