I have a used '95 Yukon that I just bought....It has the push buttons for Four Wheel drive........How do I tell if it is in one of the four-wheel modes?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
{: ) If your vehicle has an AWD (All-Wheel Drive) feature, engine power is sent to all 4 wheels all the time. This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle. It is fully automatic, and adjusts ityself as needed for road conditions.
it sounds to me like the motor that switches the transfer case into 4 wheel drive DO NOT try to put it in 4 wheel. There should be no problem driving it as it is but if you continue to try it may get stuck in between and cause major problems
Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!
The four wheel drive systems in these vehicles are simple. The push button controls the four wheel drive computer. The computer tells the encoder motor (on transfer case) to shift. When the transfer case shifts there is a vaccum switch on the transfer that is activated which sends vaccum to the accuator under the battery. The accuator pulls a cable to lock the front axle in. This covers all s series trucks and suv's with push button four wheel drive but not with auto or all wheel. Now to answer some questions. If your push button is lit up but will not go in to four high you should try to reset the four wheel drive computer. To reset pull the courtesy light and atc fuses for sixty seconds install fuses then cycle key on and off 5 times. If your transfer case shifts but your front end does not lock in check for vaccum at the switch on the transfer case in and out. If no vaccum out replace switch motormite number 49315 at parts store. If you have vaccum out check accuator.
×