Question about 2006 Jeep Liberty

2 Answers

How to turn of a check engine light after oil change in a jeep liberty 2006

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 5,763 Answers

Changing your oil has nothing to do with the engine light, if your check engine light is on then theres a problem, the computer stores codes when it sees a problem with the engine not operating correctly, you may not notice anything strange but something is wrong, the codes help in finding the problem, for example the code is po236 coolant sensor circuit. this would mean theres a problem with the circuit for that sensor and with some testing the problem can be repaired, you can go to a autopart store and they will scan the codes and give you a readout of the codes if you give me the code or codes i will be able to help you more, the engine light is reset with a scan tool or leaving the battery unhookedfor about 10 min,, the engine light will come back on when the computer sees the problem during its constant testing of all systems. hope this is helpful.

Posted on Nov 20, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 120 Answers

The check engine light has nothing to do with the oil change ,if it is on it needs to be scanned for codes and essentially repaired before the light will go out and stay out

Posted on Nov 20, 2010

Ad

1 Suggested Answer

Richard Scordino

  • 6982 Answers

SOURCE: 2002 Jeep Liberty: Battery cable loose wire was

first, though you mentioned no oil leaking, is there oil in the engine?
Next, if engine runs well and is not ticking or tapping, have the codes checked...most larger parts stores do this free. Once you have the stored codes you can look up what system is malfunctioning.
If engine is making any noise at all or there is no oil in it, DO NOT START OR DRIVE IT...make sure whoever did the oil change knows about this now...If someone forgot to put oil in, they may be buying you a new engine!
At this point it may be something simple but can also be very serious.(hope not)
good luck

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Luz marcada con el numero cinco?


2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


Dec 08, 2015 | 2005 Jeep Liberty

1 Answer

2004 jeep liberty 3.7 automatic gear shifting 3-4


tranny filter or engine filter, wow.

use a scan tool and scan, it then post the DTCs
problem never stated,

Jan 22, 2014 | 2004 Jeep Liberty

1 Answer

Hi my jeep liberty stop runing ,oil light went on and engine die?


Did the oil leak out & seize the motor,
or just go into fail safe to protect it?

Mar 08, 2013 | 2006 Jeep Liberty

1 Answer

2006 jeep liberty dying randomly. Oil change and new air filter. About to change spark plugs and wires. No gauge lights, no sputtering. Just turns off randomly, starts right back up when I put in neutral...


My 2006 Liberty has a similar issue. The oil light beeps and then the engine shuts off. I put the car in park and it restarts and the oil light goes off. I had the oil, filter, and lines checked and everything checked out. The mechanic thinks it may be the oil sensor going out and that for safety reasons the engine shuts down when the oil light comes on.

Jul 12, 2012 | Cars & Trucks

1 Answer

What should be done for the regular maintenance/service of my jeep liberty 2006 @ 5,000 and/or is it 6,000 miles.thanks!


With the quality of oils available today I would think that 6,000 Miles is an appropriate interval for normal use. If you are doing towing etc a shorter interval would not hurt it. There is nothing like good clean oil and filter change to prolong the life of an engine.

Aug 20, 2010 | 2006 Jeep Liberty

1 Answer

2002 Jeep Liberty: Battery cable loose wire was


first, though you mentioned no oil leaking, is there oil in the engine?
Next, if engine runs well and is not ticking or tapping, have the codes checked...most larger parts stores do this free. Once you have the stored codes you can look up what system is malfunctioning.
If engine is making any noise at all or there is no oil in it, DO NOT START OR DRIVE IT...make sure whoever did the oil change knows about this now...If someone forgot to put oil in, they may be buying you a new engine!
At this point it may be something simple but can also be very serious.(hope not)
good luck

Jan 29, 2010 | 2002 Jeep Liberty

1 Answer

2005 jeep liberty. got oil change about 2-3wks


recheck the oil on the dip stick. look for any leaks that you were not aware of. make sure your car is on level ground when you check the oil and mwke sure the oil is warm before you also make sure the engine is off this will give you true reading and the oil will settle when is warm

Jan 07, 2010 | 2005 Jeep Liberty

2 Answers

2003 Jeep Liberty. Changed oil, running very rough and dies.


Buy some Marvel Mystery oil from Auto Zone and add it to you engine oil. Keep an eye on your engine oil level everyday with the Marvel in there and change the engine oil every 3000 miles. Hope the Marvel will clean out the lifters for you and the rest of the sludge in the engine. Do Not Use Engine Flush!!!! There know to eat the seals and kill engine sensors.
The EGR could also be stuck with carbon build up and may need to be cleaned or replaced. Try doing this, turn your radio off and disconnect the battery for a min, turn the ignition key to the run position and re connect the battery then start the liberty. That should reset the air idle control valve
Let it idle down and then go for a test drive after it warms up. Good luck and keep me posted, while your at Auto Zone have them scan your liberty for any DTC codes. Be glad to help.

May 31, 2009 | 2005 Jeep Liberty

2 Answers

Need to reset perform service light after oil change.


Press the step button until miles to service comes up, then press and hold the reset button.

May 09, 2009 | 2004 Jeep Liberty

Not finding what you are looking for?
2006 Jeep Liberty Logo

621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...