- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
did you check fluid level -color and smell [burnt] low or burnt fluid can cause these problems you can try flush and a filter change ---unless you have training in transmissions anything other than fluid change send to a mech ---trans dont have a fuel pump---
Mazda Premacy is called the MPV here in the US. Hold light coming on is the transmission system equal to the check engine light for the engine. Sounds like a transmission related control problem. A check of codes stored will give you a better clue as to what the transmission computer is seeing as a fault. Transmission related codes are typically 700 series codes. ie P0701 or P0750. This code may give you more information as to what the problem is.
It could be that you need a transducer repair or replacement. Either way it is the signal from the dash not being received at the transmission if you are not able to remove it manually at the gear change thumb button.
I had the same problem I changed the transmission fluid & put a new filter in the trans, this fixed it good until I put my foot down to overtake the trans kicked down to 2nd gear & the hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When you change fluid its impossible to get all the old fluid out because the torque converter holds a liter or two under pressure, so when I put my foot down some of the gunk blew through & blocked the pump it looses pressure & cant change gear. You need to get it flushed by a transmission specialist
it seems that the gear bushings have worn out. you need to take your car to a mechanic to have the bushings changed. Also, please check it your car has enough Automatic Transmission Fluid.
×