1998 Ford Windstar Logo

Related Topics:

Posted on Nov 16, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

What is the toe adjustment for a 1998 ford windstar 3.8L

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,168 Answers
  • Posted on Nov 16, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: May 04, 2009
Answers
1168
Questions
0
Helped
657071
Points
4133

Hello Snsimpson



Here are all the specs for the Windstar.


FRONT ALIGNMENT (CURB HEIGHT WITH 1/2 TANK OF FUEL)
Camber

Nominal -0.25°
Minimum -0.75°
Maximum +0.25°
Split 0.0°±0.5° Caster
Right

Nominal +3.80°
Minimum +3.05°
Maximum +4.55°
Split -0.5°±0.5° Left

Nominal +3.30°
Minimum +2.55°
Maximum +4.05°
Split -0.5°±0.5° Total Toe [1]

Nominal -0.10°
Minimum -0.40°
Maximum +0.20° Clear Vision [2]

Nominal -0.2°
Minimum -2.8°
Maximum 3.2° REAR ALIGNMENT (CURB HEIGHT WITH 1/2 TANK OF FUEL)
Camber

Nominal 0.0°
Minimum -0.3°
Maximum +0.3° Total Toe [1]

Nominal -0.06°
Minimum -0.40°
Maximum +0.28° [1] Positive value specifications for toe-in, negative value specification for toe is toe-out. [2] Negative value specification for clear vision is counterclockwise.

  • Anonymous Nov 16, 2010

    So if you read it correctly the spec is 0 for toe, plus or minus point 5 degrees

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I am not asking for specs i am asking were and do i turn to adjust my toe and camber issues in the rear of my van

rear end alignment is by means of eccentric mounting bolts in the suspension bushes
Ford uses a system of an off set washer under the head of the bolt that rubs against a stop so loosen of the nut and turn the head
that makes the washer turn and moves the setting of the alignment
It should only be done on a wheel alignment machine as very little movement makes a vast difference in the setting
true qualified wheel aligners will always check the rear alignment before doing the front as the back sets up the front for long tire life
0helpful
1answer

How to adjust rear toe issues

How to Fix the Alignment on Car
Try the few steps as explained in the link i have sent you. Hope you get best results.
0helpful
1answer

How do you align properly the subframe to the body of 1998 ford windstar .

You will have to obtain a workshop manual it will show the specs. Most panel shops have a rail the chassis is fixed to and the frame can be aligned from that.
0helpful
1answer
0helpful
1answer

1998 Windstar: 1998 windstar replaced rotors but steering still s...

make sure the wheel hub surfaces are clean and free of rust both in front of and behind the rotors. also check that your rear brake adjusters are working correctly. also check wheel berring, balljoint and tierod ends for play. theres should be no play and berring should spin free of noise.
2helpful
1answer

I need to remove the drums from a ford windstar 1998 3.8.

I am assuming you have tried to remove them to no avail?

this is typically because of rust
your best chance is by decreasing the size of the star adjuster

you can by the tools at Sears but most of the time a standard screwdriver will do
1helpful
1answer

We have a 1998 Ford Windstar. When pumping gas, the pump shuts off constantly. We can only pump less than .50 at a time. We have tried adjusting placement of the fuel nozzle, doesn't help.

the filler neck would have to be replaced. ford has had problems with their filler necks in that year. it consist of 2 tubes one inside the other, that other tube could be kink causing pressure that shuts of the fuel pump.
1helpful
1answer

1998 Ford Windstar Transmission to 2000 Ford Windstar

while it is possible to perform that swap, the newer 2000+ transmissions will have updated internals and such.

so will it work............. yes.

is it optimal.................no.
1helpful
1answer

1995 Ford Windstar transmission is slipping and shifting hard

bad news, 1995 ford windstar transmissions fail extremely frequently at about 60000 miles, I would not waste money in a transmission flush as it will most likely not correct the problem. It is a dsign flaw, the transmission cannot handle the torque of the 3,8L engine and the 700Lbs of added weight of the windstar body.
I'd just use it untill it fails...
Not finding what you are looking for?

697 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...