Reset Check Engine Light LS430
1. turn off engine.
2. press and hold reset button.
3. turn ignition switch without starting the engine
4. release reset button after all of the system startup checks have finished.
5. turn off
6. start engine. maintenance light should be gone.
Hi, You have to go back where u made ur OiL CHANGE! They have to reset ur maintenance system sensor in the ECU, they are the one capable to do that! Unless u have the reseting with you? Hope that helps you out! Tahh!
Ad contact and hold the buttom for 5 seconds
Welcome to FIxYa.com
Oil Change light:
To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.
Maintenance warning light? MIL? Check engine? Maintenance Required?
You will have to go to Auto Zone to have the code read and then fix the code problem and then clear code with code reader
Regards, Lee Davidian
Thank you for using FixYa.com
651 views
Usually answered in minutes!
×