Si puedes liberar mi Alcatel 5085 de cricket para Telcel IMEI 014858001708473
Real vague. I will assume that the noise is the sway bar frame bushings. On a bump they can sound like a large hammer hitting the frame. If I am correct, there is no trick. They are not loaded, no pressure on them. The sway links are not loud. Control arm bushings squeak, not clunk, due to the fact that they are always loaded.
SOURCE: 2001 mitsubishi eclipse gt rattles over bumps at low speeds
you could have bad mounting bushings for the struts or it could be other bushings in the rear axle tracking arms. in order to find out you have to jack the vehicle up.(use jack stands to support the vehicle for safety) check all the struts and shocks and any componant that has to do with keeping the wheels on the ground . that is what the strut/shock is for. check the coils spring to make sure they are not loose. the coils spring keeps the body from bottomning out... hope this helps..........please rate.
SOURCE: rattle in front right 98 prelude
no they havent been replaced but it rides good and no height control suspension, didnt know preludes had that. never heard of that on a prelude
SOURCE: 2001 Tarus clunking sound
very common problem is the sway bay end links that attach to the strut from the sway bar. They sound like a light chuckling knock over bumps. The bushings that hold the subframe up wear or the bolts loosed due to the bushings wearing. usually the rear ones The bushings are 2 piece ,upper and lower Tighten with 18mm socket
SOURCE: rattle under the front end?
The rattle may be stabilizer link rod bushings or a strut mount loosening up as for the engine light you must hook up a code reader to determine the problem otherwise you may be replacing parts blindly.
SOURCE: squeaky mattress like noise in the front end of a
MOST LIKELY THE FRONT AND REAR SWAY BAR RUBBER BUSHINGS ARE THE SOURCE OF THE PROBLEM, ALSO THE FRONT LOWER STRUTS CAN BE NOISY AS WELL.
182 views
Usually answered in minutes!
×