Question about 2007 Nissan Versa 1.8 Sl Hatchback

3 Answers

How to replace exterior door handle on 2007 Versa.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You need a Torx head screwdriver T25. Open the door and on the side of the door is a small black grommet, remove grommet, inside is the torx screw you need to loosen for the lock mechanism to move. you dont need to remove the screw just loosen enough to move the lock assembly around. Once loose enough, install the door handle and tighten lock assembly back and put grommet back.
Here is a picture if you need a bit of visual clues.
http://img266.imageshack.us/img266/1218/versadoorhandlefix.jpg
how to replace exterior door handle on 2007 Versa. - _69.jpg

Posted on Nov 11, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

There is a very long and detailed post here; http://forums.nicoclub.com/door-handle-fell-off-what-the-t459668.html
these instructions also include a modification to prevent the door handle from getting loose and falling off in the future.

Posted on Nov 23, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

T27 would be better

Posted on Nov 10, 2012

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

SOURCE: replace exterior door handle

On most vehicles it has to be done with the door panel off and with the window up. The door panel is usually the hardest part, you have to pry out the fasteners with out ripping them out of the hardboard backing, you can get a door panel tool at most auto parts stores.
If you can, it is easiest (But it is kinda cheating) to go out to a wrecking yard and try to get the replacement first, that way you can get a chance to "practice" taking your door panel off without hurting anything expensive. You might also find one already apart and easier accessable. As you take the replacement out, take notes or pictures if you have to to remember the order of things. there will be lock and door linkage attatched, best to get all of the fasteners and clips around them and what ever else that looks neccassary. You do not want to go back for them if you find out you need them later and most places will not charge you for them anyway.

Posted on Sep 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I install the exterior driver side door handle?


You will almost definitely have to remove the inner door trim etc to access the rods etc that work the lock.
Try youtube.

Feb 17, 2016 | 2008 Nissan Versa

1 Answer

How to replace driver door exterior door handle


Door panel must be removed and then lock rod/handle rod disconnected. The handle is secured to door with 2 10mm nuts or bolts. In some cases, the window guide will also have to be removed. This can be a frustrating procedure if not mechanically inclined

Aug 03, 2015 | 2009 Nissan Versa

2 Answers

How do I replace drivers side exterior door handle on a 2007 nissan versa s hatchback


For a permanent fix, you'll have to take the door panel apart, drill a hole through the handle and the big plastic door mechanism inside, and then insert a cotter pin. I found out how to do so via a nicoclub.com forum, but the critical photos of the operation seem no longer to be available there.

Try these two sources:

Door handle fell off what the Versa Technical Discussions

Door handle fell off what the

The first link is my notes in Evernote, including the photos from Nicoclub, while the second link goes to the Nicoclub forum on the problem, where at the end someone has added a photo showing you exactly where to drill the holes in the door mechanism.

Aug 04, 2014 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Replacing exterior rear door handle


Before removing the door panal remove both door handel and unlocklatch check for any crews near speaker then try from a corner

Apr 04, 2014 | 2007 Opel Antara 2.0

1 Answer

Nissan versa plastic door handle lock cover popped off


Look for clips, screws, brackets,etc,and try get all in place, the covers can fit in a specific way.
Apply some glue to hold it in place, providing that the cover fits perfectly, if needed to visit the mechanic or bodyshop.

Jan 24, 2014 | 2009 Nissan Versa Hatchback

1 Answer

How to tighten passenger side exterior door handle on a 2007 honda accord sedan


There should be retainer nuts on the inside. You would have to remove the inner door panel to access.

Jun 30, 2013 | 2007 Honda Accord Sedan

1 Answer

2007 yukon exterior door handle paint is pealing off. GM told me that I should have waxed them more often. Does anyone have any experience with paint not adhering to plastic door handle?


If there REALLY is a requiremert to wax the door handes (and I severly doubt it) let the dealer show you where it is noted in the owners manual. He will not be able to find it, I am sure. I am also sure you have no way of wining this battle, considering the 07 Yukon is long out of warantee. The best you can do is tell hi he's full of **** and a liar. BUT!! if he's the only dealer in town, don't do that. You may need him someday.

Nov 21, 2011 | 2007 GMC Yukon

1 Answer

Rear door on 2001 sienna won't open


The door handle might be broken, you need a new part. I got mine online for $40. keywords: 2001 2002 2003 2004 2005 2006 2007 Toyota Sequoia Metal Lift Gate Exterior Door Handle for Rear Outside Van Tailgate Handle. You need to remove the back door panel to replace this.

Mar 06, 2010 | 2001 Toyota Sienna

1 Answer

Replace left front door outside handle pot metal tip broke off


SECTION 501-14: Handles, Locks, Latches and Entry Systems 2001 Escape Workshop Manual REMOVAL AND INSTALLATION Exterior Front Door Handle Removal and Installation
  1. Remove the front door trim panel. For additional information, refer to Section 501-05 .
  1. Position the watershield aside.
  1. NOTE: The tie strap does not need to be reinstalled.
    If equipped, remove the tie strap from the anti-theft guard.
  1. Remove the screws and position the anti-theft guard aside.
  1. Release the clip and disconnect the exterior door handle actuating rod.
88661dd.gif
  1. Remove the anti-theft guard.
  1. Remove the exterior door handle screw.
  1. Remove the exterior handle actuating rod.
  1. Remove the exterior door handle lock cylinder cover.
  1. Remove the exterior door handle.

Apr 25, 2009 | 2001 Ford Escape

Not finding what you are looking for?
2007 Nissan Versa 1.8 Sl Hatchback Logo

10,396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...