Replacing a starter on a 1993 volvo 940 turbo. Is this a difficult task?

It looks easy for the 940 but I am not sure about the 940 turbo, as maybe some of the turbo parts are in the way. I'm not sure about that, since there is no documentation on the turbo model vs. the 940 standard model. If you can follow the following instructions, then I would give it a whirl.

REMOVAL & INSTALLATION - 1993 Volvo 940

1. Disconnect the negative battery cable at the battery.
2. Disconnect the leads from the starter motor.
3. Remove the starter motor retaining bolts.
4. Remove the starter motor from the vehicle. To install:
   
5. Position the starter motor to the flywheel housing.
6. Apply locking compound to the bolt threads and install the retaining bolts finger-tight.
7. Tighten the bolts to approximately 25 ft. lbs. (34 Nm).
8. Connect the starter motor leads and the negative battery cable. Fig. 1: Unfasten the nut retaining the starter cables . . .
   Fig. 2: . . . and remove the starter creplacing a starter on a 1993 volvo 940 turbo. Is - 90952p14.jpg src="/uploads/images/90952p14.jpg" alt="90952p14.jpg" class="h_mi" />
   replacing a starter on a 1993 volvo 940 turbo. Is - 90952p11.jpg 3: Unfasten the starter retaining bolts . . .
   Fig. 4: . . . and remove the starter from the ereplacing a starter on a 1993 volvo 940 turbo. Is - prev.gif