Ware is the wiper module located on a 2000 crown victoria

Use vinegar to unfreeze

that's because it's a wiper control module that I think your looking for what is happening anyway do they work at all ==yes/no only certain positions work===yes/no or won't shut off ===yes/no



that's it right here^^^^^^^^^^^^^^^ and the location is in the diagram above but you must check all the fuse/s first Google 1996 ford crown Victoria and download for free to your phone/computer that way you'll always have it then go to roadside emergencies and the passenger fuse box/power distribution box diagram under the hood are there and is needed for times when something happens on the road if your wipers stopped working because you tried to use them without clearing ice away or a big piece of ice got stuck in the cowl where the wipers are you blew the fuse if they work erratically or won't shut off or stop up on the window blocking your vision either the module shown above or the wiper transmission in the wiper motor has failed and must be replaced as a whole unit

See this pic .



if this doesn't help please visit this forum for full details.
ELECTRICAL Windshield Washer Motor Fuse Location Crownvic net

try the drive belts spray with wd40 or similar see if the sound changes .if so renew belt.

Look under your hood on the driver's side of the engine compartment. There a black box located on the fender well with a cover on it. Under the cover, is a diagram showing the position of each relay fuse.

I suggest check position 2, 30A for Wiper Control Module, Windshield Wiper Motor...



Keep in mind that this and other important information could find in Ford Crown Victoria owners manual.

Hope this helps; just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Have a nice day and thanks for using FixYa.

Jose.

check in Power Distribution Box, position 110, 30AMP (Cartridge fuse) for Wiper Module.

i believe it is part of the wiper motor which should be located in the driver's side rear corner of the engine bay, on the firewall. Many 03 and up Fords use a "Smart motor" for the wipers which has the motor and a module in one piece.

here is a diagram

Locations In Case this Picture Doen not SHOW UP FOR YA --
WIPER Fuse ok Lookin at the box with the Round Circle In TOP RIGHT Corner Wiper is Number 2 Bottom from That Circle would be 2nd one from right Suppose to Be a 30 amp fuse Hopin this Helps Ya If so Please RATE Me AS High as You feel I Dererve Thank You and Good Luck with the CROWN VIC
Notes

hello jaronricky , the Powertrain Control Module (PCM) is located right next to the power brake booster . 2000 crown vic