Hey u may have figured it out already ,but if u look under the head rest u should feel the two long iron poles going into the head rest on one side of one of them theres a button that blends rite into the design of it so look carefully
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a round plastic thing with tabs sticking out if you turn it counter clockwise you can pull it backwards over the wire and then pull the bulb out
1.Lift headrest and headrest support bars trim all the way up. 2.Insert tongue depressor (or slim jim) down the front side of the headrest bar.Push depressor down as far as possible.When the depressor is beneath the headrest trim piece, push headrest all of the way down. 3. Lift headrest to remove.
first you need to remove the pillars then remove seatbelts then remove headrest then remove the back of rear break light then you can take off the rear dash then you can change them
hello,you need to remove your rear seat,,look for your your headrest valve ,there is a lock pin with tension clip in headrest rod ,remove the pin,try to remove your headrest slowly,ty
I'm not positive about that model, but some of them had a button that you pushed built right into the seat, right beside where the shaft for your headrest goes in. Just push beside the shaft on either side of the post with your thumb.
click this link directly its the manual of your vehicle.everything is mentioned. It's pretty easy. Raise the headrest all the way up. Look at the plastic pieces on the seat where the headrest supports go into the seat. One of them will have a small hole. Get a paperclip and push it into the hole while pulling up on the headrest and it will come out.
The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.
×