My 95 oldsmobile cutlass ciera is clicking when i turn right. i replaced both left/right cv boot axles. on my left driver side i see my balljoint cracked. the tierod looks good exept that bushing. and the front engine mount is busted bout to replace that. is there any other place im missing

SOURCE: The windows in the 95 oldsmobile cutlass ciera won't work at all

maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.

SOURCE: 1991 oldsmobile cutlass Location of starter

Follow the red wire from the battery towards the firewall. It will end at the starter.

SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera

ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.

Testimonial: "Thank you very much for your advice and time!"

SOURCE: how do I remove the windshield wiper arm from a

most car parts stores will do it for you and you can watch

SOURCE: 1995 oldsmobile cutlass ciera wiring diagram

they can be bought on line but the easiest way is to buy a manual from local parts store, or possibly check one out of the local library