How do I replace my front brake pads on my nissan quest
Remove wheel & tire,
remove 2 torx bolts that go from the inside to the outside of the vehicle. They are on the inner side of the brake caliper.
lift the caliper out of the rotor.
remove the brake pads.
To install, you must first squeeze the caliper piston back inot its bore. Do this slowly to prevent damage to the piston. You are forcing excess brake fluid back into the master cylinder reservoir. Slow constant pressure will get the job done. Use a large c clamp or a wooden hammer handel if that's all you have.
Fit the new brake pads in the calipers and slide the assembly back over the rotor.
install the 2 torx bolts, size 40? head I think.
You are done.
If rotors are scored bad, replace them too.
You have two bolts on in side of brake caliper undo the hole claipier should come away
CAUTION: Make sure the master cylinder reservoir does not overfill and spill brake fluid while retracting the front disc brake caliper piston. WARNING: It is necessary to depress the brake pedal several times to position the front disc brake caliper piston before driving the vehicle.2,463 views
Usually answered in minutes!
I replace the brake pads and the calibers,master cylinder and bled the brakes from back to front and still the brake pedle gose downto the floor its a 2001 quest
I replace the brake pads on my Nissan titan 2004 and I believe my brake were stick before I change them but now they are stuck
Nissan quest valve
Nissan Quest valve
how often to replace rhe timing belt on 1998 nissan quest
how do i replace the alternator on my 1996 nissan quest?
I have changed the bulbs on my Nissan quest and still have no brake lights
×