-
Ford Master
2,122 Answers
- Posted on Oct 22, 2010
Re: Push on the horn and I here a ckicking under the...
The clicking is the coil side of the horn relay....That pulls in the contact which carries the heavier currant needed for the horn operation.
To work on this fault you'll need an electrical test meter or light....
- Locate the actual relay by having someone press the horn and NOT hold it down
- The clicking will lead you to its position.
- Unhook it from its bracket and with the meter check that the switching side of the relay is closing when the horn is pressed.
- If not replace the relay.
- If power is going across the switching side go to the connection on the horn at the front of the vehicle and check the power output there
- If you have power there, check to make sure the earth contact to the body is intact.
- The earth contact is usually through the horn button via a contactor on the steering wheel assembly.
- I would think that that is fine as the relay is operating.
- if all power is coming from the relay and the horn is grounded correctly, replace the actual horn.
Have a good honk best regards Johngee10
×