I have a 97 s10 pickup its a 4 cylinder and i want 2 know if a votex v6 engine, that came from a 97 s10 blazer will bolt up 2 my transmission

very limited info generic answer no they will not need to do fab work ---mounts --harness--hoses--body work ---- if 2x4 or 4x4 driveshafts --- transfer case not simple- go to some of the s-10 forums some have info on swaps 8 from 6 ---8 from 4--6 from 4 -4 from 4 etc

You would be better off going to a auto salvage yard an getting a whole wring harness out of S-10 that had a V-6 with TBI ! Go on the internet , some salvage places have a hot line so to speak an can find one . 4 3L V6 Intermediate Wiring Harness EFI TBI Chevy S10 GMC S15 Blazer Jimmy... This just an example !

Here they are depending on if you have a four cylinder or the V6:

2.2L Four Cylinder Engine: 1-3-4-2
4.3L V6 Engine: 1-6-5-4-3-2

the 2.2 is a 4 cylinder and all other stock motor's for an s-10 are v6's if the motor your thinking of is a 4.3L vortec then good choise, it and a 350cid v8 use the same bell housing but u will have to upgrade to a tranny from the larger engin's to make it work, and to hadle tha added pewer reliably

For the 1993 Chevrolet S10 Blazer 4.3 V6, Both: 2WD AND 4WD:

Firing Order:
1-6-5-4-3-2

Cylinders:
.......(back).......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor:
....(back)
(+).4...3
5...........2
..6...1..(+)-screw
.....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

For the 1992 S10 Trailblazer: 4.3L V6:

Firing Order:
1-6-5-4-3-2
Cylinders:
.........(back).........
|..6..|........|..5..|
|..4..|........|..3..|
|..2..|........|..1..|
........(front)
Distributor:
... (back)
(+).4....3
5.............2
....6.....1..(+)-screw

Let me know if this helped...

For the 1991 Chevrolet S10 or T10 Pickup 2.8L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
.......(back)........
|..5..|........|..6..|
|..3..|........|..4..|
|..1..|........|..2..|
.......(front)

Distributor:
....(back)
....3...4.(+)-screw
2...........5
(+)1...6
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

For the 1991 Chevrolet S10 Blazer 4.3 V6, Both: 2WD AND 4WD:

Firing Order:
1-6-5-4-3-2

Cylinders:
.......(back).......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor:
....(back)
(+).4...3
5...........2
..6...1..(+)-screw
.....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

I need to change the starter on a 97 Blazer s10 4wd . it a v6 vortex engine. What is the esiest way without jacking up the engine.