Testing the starter electrical circuits is how to find the problem . Viewing wiring diagrams to see what all is involved in the starting of your vehicle ? Most vehicles have a starter relay that is energized by the PCM/ECM - engine computer . B+ voltage comes from the ignition switch going through the starter relay control side to the PCM - which will ground that circuit turning on the relay sending B+ voltage to the S terminal on the starter solenoid .
Do you know what a automotive relay is an how to test ? How to test for B+ voltage at the starter ? How to use a DVOM - digital volt ohm meter ? Free wiring diagrams here http://www.bbbind.com/free-tsb Enter your vehicle info. year , make , model and engine size. Under system click on engine ,then under subsystem click on charging system . Click the search button then the third blue link , this is the starter electrical circuit . This diagram doesn't show the park neutral safety switch input to the PCM . Speaking of the park neutral switch , put transmission in neutral an see if it starts then , could be the switch is bad .
check out this videohttps://www.youtube.com/watch?v=WMXENKuj...
×
SOURCE: ac problem
please click this link and select the proper option given there and solve it by yourself and get your doubts cleared.
http://www.ptdoityourself.net/tl/tl_indexmain.html
SOURCE: 2004 chrysler pt cruiser starter motor removal
You may sneak it out with small fingers with out pulling out the starter.
If starter removal is required,Just unhook the battery cables,Remove the 2 bolts holding the starter on.
Please rate this a fixya
SOURCE: Horn Solution
The horn is located in the front fenderwell on the passenger side behind the inner fender. You can't see it until the inner fender is taken out of the way.
306 views
Usually answered in minutes!
×