And?
SOURCE: I am trying to change the serpentine belt on my
First, you need to have the diagram for how the belt is routed when you replace it.
Serpentine routing diagram...
Here is a link to a video on how to replace the serpentine belt. I hope it helps!
http://www.wonderhowto.com/how-to-inspect-replace-cars-serpentine-belt-267229/
SOURCE: How to change serpentine belt on a 2002 altima
Lift car...Turn wheels to right....Remove inner splash shield. Use 14mm long wrench to move belt tensioner back. Install belt...
SOURCE: 2008 Chevrolet Aveo5-Serpentine belt change
Stick a 1/2 inch ratchet or breaker bar into the square slot in the arm and turn.
SOURCE: how to change the Serpentine belt on a 2008
First, you need to have the diagram for how the belt is routed when you replace it.
Serpentine routing diagram...
Here is a link to a video on how to replace the serpentine belt. I hope it helps!
http://www.wonderhowto.com/how-to-inspect-replace-cars-serpentine-belt-267229
1,090 views
Usually answered in minutes!
The problem you run into is getting the relatively stiff new belt positioned correctly around all of the pulleys accept the tensioner pulley. Once that is accomplished you'll definetly need a long handled 14mm wrench to turn the tensioner pulley nut clockwise and then slide that portion of the belt over the tensioner pulley
×