SOURCE: need belt schematic for 2006 toyota corolla
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
SOURCE: procedure to change serpentine belt 2006 toyota tacoma?
Here is your Solution!
You will need to Locate the Belt Tensioner. It has a Large Pulley on a Bracket that Has a Bolt in the Middle and a Smaller Pulley that Goes Under the Belt and Holds Tension on it. You will need to get a Wratchet, Socket, and Cheater Bar. Turn the Bolt On the Top Large Pulley with the Wratchet and Cheater Bar. This will Lower the Smaller Pulley So that you will be Able to Remove the Belt. Please Rate My Response! Thanks! P.S. the link below is for the Belt Routing Diagram.
http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=TOYOTA&model=TACOMA&year=2006&year_from=&year_to=&engine=All&l=n
SOURCE: i need a diagram of a 2006 toyota tacoma
I'm not trying to be a smart-a_s, but there is usually a sticker under the hood with its picture. Any help?
SOURCE: Trying to put the serpentine
the belt routing should be on a sticker under hood. if it is gone, go to any auto parts store and they should be able to help you. if not, go to dealer and they should give you a diagram of the 4.0 for free.
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt,
serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all
types of car models?
Click the link below: ----
http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.
1,974 views
Usually answered in minutes!
×