Need help with installing a new starter on my 91 olds cutlass ceria

You will get your solution and
all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV,
owner's/service/repair/parts/maintenance manuals etc everything
this website www.reliable-store.com
it's a very good website for vehicle problems even as old as 1991 ford..

Google and YouTube are your friend~ they have more info with pics and videos for inexperienced to the experienced .

Make sure your new alternator is working. Just because it's new doesn't mean it works. Have it tested. Autozone will do it for free.

these only have one cooler located in the rad from the factory.if you have installed a aftermarket cooler it will be fastened to the front of the rad in the air flow which won`t affect the ordering of a new radiator.

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f80393827

49 state


CA state

go to the link for a picture of how it all goes.

http://autorepair.about.com/library/firing_orders/bl-fo-7480.htm

Try steel rubber products, i believe they have an on line catalog.

yes the part its usually at the air intake it has 2 screws its real easy to replace take the screws oput and reconnect the wiring/ Please rate my response thank you very much

with a 3.1 liter , remove and install directions are remove serpentine belt , remove power steering pump assembly , then remove sensor harness , sensor bolt , remove sensor , so it sounds like behind the power steering pump assembly area if that makes sense . it has to be real close the the cam gear , you should be able to find it .

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=OLDSMOBILE&model=CUTLASS%20CIERA&year=1989&year_from=&year_to=&engine=All&l=n

This should Help. Please Rate My Response! Thanks!