How easy is it to replace a 1999 Honda Accord Steering Wheel Pump?
Was this solution helpful? Show your Appreciation by rating it:
See an example
DISASSEMBLY
1.
Remove the suction pipe and the O-ring from the oil pump.
2.
Remove the rear cover with the gasket and pins.
3.
Remove the cam ring.
4.
Remove the rotor and vanes.
5.
Remove the front side plate.
6.
Remove the inner and outer O-ring.
7.
Remove the spring.
When assembling, use a new gasket and O-ring.1999 Honda Accord Coupe - 47a7732.gifg src="/uploads/images/47a7732.gif" alt="47a7732.gif" class="h_mi" />
8.
Remove the pulley nut with the spring washer.
9.
Pull off the p1999 Honda Accord Coupe - a12b5d7.gifhe woodruff key.
10.
Remove the snap ring using snap ring pliers.
11.
Drive out the pulley shaft with the bearing. If necessary, use plastic hammer
12.
Remove the oil seal from the oil pump body.
When assembling, use a new oil seal.
13.
Remove the guide bracket and nut.
14.
Remove the connector from the oil pump body, and take out the flow control valve and the flow control spring.
15.
Remove the O-ring from the connector.
Do not disassemble the flow control valve.
16.
Remove the oil pump switch.
17.
Take out the spring and the spool.
18.
Remove the O-ring from the oil pump switch
×
699 views
Usually answered in minutes!
what is the pcm on a 1999 honda accord?
how do you do it
replace water pump 1983 1.8 Honda accord
2013 Honda Accord Coupe parked in the garage, Occasionally when I return to the garage I find the sunroof open the windows down and the trunk lid open
steering wheel is tight and noise near the belt
Electric steering rack pulling to the right not self centreing. Been analised as maybe torkue sensor could this be right.
×