SOURCE: STARTER - 1993 cutlass ciera
According to Chilton's, and assuming you have the 3300 V-6, it won't be fun. The first instruction is to drain the air conditioning system, and remove the front manifold. The starter is between the engine and the radiator. The deal breaker for me is the A/C draining/refill. If anyone knows of a way to avoid the A/C drain, let me know. Otherwise, I may just preemptively replace mine before my buddy runs low on R-12.
SOURCE: The windows in the 95 oldsmobile cutlass ciera won't work at all
maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.
SOURCE: how to change a starter in a 1992 oldsmobile cutlass ciera
disconnect battery,three bolts hold it to bell housing and two wires ,one is the feed the other activates the solonoid Easy job to do but dirty dirt grease and muck
SOURCE: 1991 oldsmobile cutlass Location of starter
Follow the red wire from the battery towards the firewall. It will end at the starter.
SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera
ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.
Testimonial: "Thank you very much for your advice and time!"
60 views
Usually answered in minutes!
×