1996 Cadillac Eldorado Logo

Related Topics:

Posted on Oct 05, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Need to know what code 1406 is - 1996 Cadillac Eldorado

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,190 Answers
  • Posted on Oct 05, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Jun 07, 2010
Answers
1190
Questions
0
Helped
488061
Points
3636

Hello, Code 1406 refers to the EGR Valve pintle position, If the wiring and connector is okay then you will need a new EGR Valve, It is located on side of engine on top near the fuel lines attached with two bolts has one electrical connector

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i fix a code 1406

The code is being thrown because the most likely cause is a vacuum leak. You will have to check all likely areas for such leaks on your vehicle.
1helpful
1answer

1406 for 97camaro ss code

Just go to this adress , you 'll have all you need to know what it's all about.

http://www.obd-codes.com/p1406.


Hope this will help you!!
0helpful
1answer

1995 GMC Jimmy P0172, P0300, and P1406

Code 172 is for the fuel system being too rich on bank one.
Code 300 is for a random miss, and code 1406 is for a problem with the EGR valve or sensor.
Each component would need to be tested.
1helpful
1answer

Code po174 ,1406, @ p0151- 96 cadillac deville

the 1406 code is your egr valve. this could cuase the other codes and the cold start problem. replace it
1helpful
2answers

96 s10 with 2.2 4 cyl. got code 1406 which is egr valve pintle circuit. Would this cause rough rich idle,bogging under full throttle even in nuetral and no power. Only code that come up is 1406. Thanks...

pintle position on EGR valve is incorrect if voltages are correct on EGR connector replace EGR valve if voltage readings are wrong at connector replace ECM both are found on ebay for under 75 bucks
0helpful
1answer

Can you tell me what Code 1406 is

Differential Pressure Feedback Electronic Sensor circuit Downstream Hose, I would check for a hose leak at the DPFE sensor, located next to the EGR valve. Hopethis helps, let me know.
2helpful
2answers

Chevy pickup 350 vortex code p-1406 comes up can't find what code means in my book. i know it has something to do with manufacturer control auxiliary emissions controls. i don't know where to look for the...

DTC P1406 IS EGR VALVE PINTLE POSITION CIRCUIT MALFUNCTION CONDITIONS.POSSIBLE CAUSE EGR SOLENOID CONTROL CIRCUIT IS OPEN SHORTED TO GROUND OR TO B+ -CHECK EGR VALVE FUSE - OR THE EGR VALVE AND PCM HAS FAILED.
1helpful
1answer

Where is the location for code 1406 96 chevy blazer 6 cylinder. we are getting a whistling or like an air exhale when presing the gas. The computer that we put to it stated the code 1406. We have found in...

P1406 is a EGR problem on the gm products, P1406 is a vent hose disconnect to the axle on the ford products. The PCM does not know where the EGR pintle is. This can cause poor running and bad idle. About the only thing that you can do is remove the EGR, clean it and carefully inspect the plug and connections on the valve its self. If that does not solve the problem then its time for a new one. Look at the wiring harness to the valve for crushed / cut wire also. It is possible to bench test the valve but it does require a good multimeter. Good luck and hope this helps. Use a carb cleaner to get the carbon out of the EGR valve
0helpful
1answer

I have a emission code 1406 for my 1996 isuzu rodeo, what part do I have to fix?

I read in car and driver that a catalitic converter takes care of about 80% of the emissions inspection. and you could get buy on it alone, even in cali.
Not finding what you are looking for?

150 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...