1997 Saturn SL Logo

Related Topics:

Posted on Jul 18, 2017

I have a 97 Saturn SL with twin cam engine. The trans goes through the gears fine (automatic trans), but after 2 minutes or so, it drops out of overdrive, then out of drive, and it ends up in second gear. When this occurs, it's not slipping out of these gears, but it feels the same as if I was to manually shift down from overdrive, to drive, then to second. Any suggestions as to where to start looking for the problem?

5 Related Answers

Anonymous

  • 37 Answers
  • Posted on Jul 12, 2008

SOURCE: 1998 Saturn Sl 1 Won't start some times.

I could not find any diagrams.......but it may be the park lock cable.. or you could have something jammed underneath the shifter.... a penny....or some other misplaced object that can slip underneath the cracks and cause it to not go into park all the way....the center console is fairly simple to remove a few bolts and I think a couple pop rivets.... a Haynes Manual on all the s series Saturns is available at your local auto parts store (advanced auto, auto zone, Pepboys) it'll run you like 20 bucks but will definately prove helpful to you ... Im looking at mine right now and it shows you how to completely tear it down and rebuild it.

Ad

Anonymous

  • 2 Answers
  • Posted on Nov 24, 2008

SOURCE: 1994 Saturn SC1 reverse slam on occasion

my bet is the valve body. i have change 3 of my own on my last 98 sl1. same symptoms as you describe here

jmassengill

Johnny Massengill

  • 345 Answers
  • Posted on Dec 07, 2008

SOURCE: 1997 sc2 saturn automatic

I had a 1991 Dodge Caravan that did the same thing. I had a transmission rebuilt because of the problem you describe. I was told it was a seal inside the transmission that was leaking fluid from an internal chamber when the engine was at an idle (like it is when you are at a stop sign). A redesigned seal fixed my problem. I would bet if you gave it a little gas with one foot and kept your foot on the brake it wouldn't act like it had dropped out of gear. If you have the money for a transmission rebuild that might be something to consider but if you are tight on money, a bottle of lucas transmission additive might help your problem. That seemed to help me so I could get some money together for a transmission rebuild. I realize that most mechanics will say that your transmission doesn't need an additive of any kind, I also realize that sometimes in real life you have to do what your pocketbook/ wallet can afford.

Good luck.

Anonymous

  • 318 Answers
  • Posted on Jan 19, 2009

SOURCE: 97 saturn CL2 having shifting problems

Check the Transmision kick down cable,,which is attatched to the throttle cable and goes into the transmission,,it may need adjustment.

Rickygittins

Ricky Gittins

  • 715 Answers
  • Posted on Jun 26, 2009

SOURCE: Do I have linkage problems, or something more

Ok, remove the console so you can look at the shifter, there is a plastic piece that attaches the cable to the shifter knob, this breakes, you can go to Saturn ,but they want almost $200 for both cables (they don't sell the plastic piece) BUT THERE IS GOOD NEWS, Napa sells the plastic replacement part at a cost of $20 I am assuming that your car is a manual, part is fairly easy to install,(remove the shifter without removing the cables)
Good luck

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ow do i fixtrans codes 71 and 97 on a 1991 saturn sl

Saturn, sl 1991.
it has antomatic transmission.
so does it shift funny,????
if not reset the PCM (TCM) and see if the codes return.
if yes, they are real.
the car has this book, called a FSM , it shows every step to take
for each code. the Factory service, manual, if you beg GM , they might help, dont know.
Here in town only the Buick dealer touches Saturns....

71 engine over temp
http://www.saturnfans.com/forums/archive/index.php/t-28570.html
97
i think you counted the flash wrong on 97 ,zero posts world wide. on that is my clue.
what makes you thing those are trans codes>? (shoe drops)
0helpful
1answer

I have a 1998 saturn SL2 with a LL1.9LL4 engine, want to switch out with a 1998 saturn SW2SW wagon with a 16 valve twin cam will this work? SL2 engine blown, SW2SW ****** is going!

If you are replacing a DOHC 1998 engine with another DOHC 1998 engine yes it will work. Saturn only made two engines from 91-99 and they all had the same block, difference some were SOHC and others were DOHC. The number "1" after SL or SC or SW means SOHC while the number "2" after SC or SL or SW means a DOHC.

Note if one is an auto and the other manual you are going to have to swap the flywheel/ring gear stuff over.
0helpful
2answers

What kind of fluid goes in the transmission of a 95 saturn sl 1 manual transmission?

gear oil, weight and capacity is in the owners manual. the guy behind the counter at the parts store can sell you some.
0helpful
1answer

Timing engine marks for a sl saturn 92 twin cam

how to know if a saturn 95 twin cam is in time? what should i follow?
1helpful
2answers

My 98 saturn sl2 is very hard on reverse. if the engine just started, it reverse slightly. but as the engine gets warm the reverse is not working. help please.

could be 3 things
if you have reverse but a bad delay into reverse it could be a loose input shaft nut in the trans,and or a bad valve body
if you have no reverse you got a torn seal in the trans but if you have a torn seal you will have no second gear as well as they share this seal,,,i would take it to the saturn dealer as trans shop have no idea how to fix these,like cottman and them have no idea,,take it to saturn
0helpful
1answer

Replace transmission get it to mount up but gears will not move something spim missing 1996 sl standard transmission

I am guessing it is a manual?
The Single Cam Transmission will not work on a Twin Cam Engine
8helpful
1answer

99 saturn sl2 has lost reverse

Reverse & 2nd gear share the same clutch pack.Usually when reverse goes out you will get wierd shifting into 2nd or 3rd.Most likey the Input shaft retaining nut has come loose inside the first clutch housing.It can be accessed from the trans end cover but it will take some disassembly.The trans doesn't have to come out to correct this problem.I repaired many saturns with this problem.The only parts you will have to buy is an end cover gasket(paper gasket) & 41/2 qts Trans fluid.Decent mechanice could do this in about 2-3 hrs or less.The service engine light is probally on due to trouble codes from the trans controller most likey DTC P0723 No 2nd gear.hope this helps
3helpful
1answer

Changed timing chain and need to align to cam with the crang

Align the chain with the colored links on the chain over the marks on the cams.Twin cams Have a small hole on the cam gears that will align with a hole in the front of head.Crank Gear has a pip mark that goes straight up.colored links on crank go to the 5 & 7 Oclock position on the lower crank gear with pip mark on crank gear at 12:00.Hope this helps
Not finding what you are looking for?

81 views

Ask a Question

Usually answered in minutes!

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...