In dash computer shows message no data link activities,also no oil pressure,rpm,tempeture, but engine still running.
this problems is for 1998 freightliner truck ,no for the jaguar .
Your problem is in the wiring above the starter, problem occurs when engine gets washed. they spray the plug ins. un plug all conections and use soime die electric grease in the plug. problem solved..
I have 30 piece of detriot serios 60 in kuwait only 30 enginens only for 2500$ from usa telphone no 00965_99635180
Start tracing power wirings to cab. Some of these come off the starter area, that power these items you mentioned. I had the same issue on about the same year Volvo with a Cummins engine. Also check all you fuses and relays. The one I had I found wiring issues near the starter, where the cab pulls power to that side of the dash.
Need to look on the ecm make sure all wires are tight and check you cannon plug going in the firewall and check for corrostion unhook and hook back up,I hope this helps you and thank you
You have lost your data link either at the ecm or the cannon plug,
when you turn you key on do you have a cel on
This a important question,did this truck at one time have OBC on it?And if it did are the wires just hanging,If so that can have havic with you dash if there is any corostion or pinch wires,I have had a few do what you are saying,I am a shop foreman for detroit and have seen alot of weird stuff happen,If you did have a OBC system or still do,unhook you OBC at the box or tower depending on what system you have,and recheck,if the Obc has been removed ,right behind the seat in the b pillor were you diag hooks up unhook your 1708 wire,I hope this helps you and Thanks
I don't know if your still on here wilsodfarm, but I have a 2005 International 9400i, and I'm having the same dash problems. I bought the truck used and it had an OBC system in it. The cable to the qualcom is just hanging in the back. Do you know where I can disconnect the OBC?
Hello everyone, I got the same problem but sometimes my truck trun on without issue, sometimes I have to use started fluid spray. Checked all wires and connections, but couldn't see anything wrong
Hopefully someone can help me. God bless y'all.
×
4,560 views
Usually answered in minutes!
i have detriot diesal 60 series in my freightliner it shows low oil pressure at 1700 rpm going up hill and down hill when rpm comes to 1500 then oil pressure comes to 60 as usual
my ICU say warning no data link activities
×