P0445- EVAP purge control circuit fault!! Check your gas cap, this will cause insufficient vacuum activating the SES indicator. Check the following
a) Absent or tampered fuel cap. b) De-linked or faulty fuel tank pressure sensor. c) De-linked, damaged, pinched, or blocked EVAP purge line. d) De-linked or erroneous EVAP canister purge valve. e) De-linked or incorrect EVAP vent solenoid. f) Open ignition feed circuit to the EVAP vent or purge solenoid. g) Tampered EVAP canister. h) Leaking fuel sensor assembly O-ring. i) Leaking fuel tank or fuel filler beck
1,793 views
Usually answered in minutes!
×