Alarm keeps going off. what is the problem which fuse can i remove?

It is a known issue. I found this. You just need to remove one fuse 'F11'.

https://www.google.com/search?q=Volvo+C70+roof+alarm

Enes Volvo Expert, Expert
Go under hood locate fuse f11 20amp remove that see how that goes? Go try removing fuse # f65 under passenger side is fuse box above your feet area second try
Enes Volvo Expert, Expert
Also fuse f15 under hood 30amp remove together with fuse 11 both are under hood
Enes Volvo Expert, Expert
fuse under passenger dash foot area fuse f43
Enes Volvo Expert, Expert
If you can press accept I don't get paid or credit for reply if don't press accept green button . Thank you
Enes Volvo Expert, Expert
what fuse did work?
Customer
Removing the F11, 20 Amp fuse stopped the alarm and radio still plays. Thanks!

..

If it is factory then no. If it is aftermarket you can pull the fuses or have the alarm module removed.

alarm keeps going off - Acura Forum : Acura Forums

www.acuraworld.com > ... > CL > 1st Gen CL

Jun 6, 2011 - 8 posts - ‎4 authors
Now the alarm is suddenly going off when I put the fuse back in. ... I am going to print it and keep it with my stuff in my Acura folder. ... as i connect the battery terminals and wont turn off with the remote. can you help me on this one please? ... Join Date: Sep 2012. Posts: 2. Car 1: 1998 Acura 2.3 Cl. alarm ...

1999 TL Deactivate Alarm/pull the fuse - AcuraZine Community

acurazine.com/.../problems.../1999-tl-deactivate-alarm-pull-fuse-746888/

Oct 4, 2009 - Is there a way that I can deactivate the alarm on my car. ... It is very annoying, especially when it goes off for no reason in the .... My 2001 CL black box has 4 relays, 2 grey, 2 black.removing any and ... Troubleshooting Fail: Stuck Drivers Window, xsilverhawkx, Problems & Fixes, 5, 09-28-2015 07:51 PM. 2005 TL, HFL Malfunction and Parasitic Draw
May 7, 2012
2012 TL Remote Starter
Jul 15, 2011
99 acura tl stuck in park and brake lights won't work
Aug 25, 2010
1999 Acura 3.2TL shuts down on its own
Jul 20, 2009
More results from acurazine.com

Welcome to French car electrics! Nothing is simple on these. Get help from an electrician/tech or remove the alarm fuse. Sorry, but they are a nightmare.

Depending if it is a aftermarket or a factory alarm, they should all have fuses that can be removed. By removing the fuse, you may lose your keyless entry option. Most aftermarket alarms have a siren that is usually mounted under the hood in the engine compartment area. I've seen where people have cut the wire going to the siren to disable it but keep the power going to the alarm system to keep the keyless entry still functional if it came with the alarm system.
Factory alarms usually use the existing horn for the alarm. If that is the case, you might need someone who is experienced to disable the circuit so that the horn will not sound if alarm goes off but the horn will still be functional when needed. Hope this helps.

It can't be removed if it is a factory system.

Try YouTube. Type disable car alarm or car alarm keeps going off. You'll find several videos of people fixing alarm malfunctions.
Good luck. Hope this helps.

can you check under hood, there is a fuse box, remove fuse box lid, inside is printed names of circuits if you have an alarm circuit , remove that fuse, then check if car starts and runs, if so, alarm is disabled.

To all you Acura alarm sufferers. In the immediate term to appease your neighbors - open the door and reclose, leaving the door ajar enough that the interior door light is still on. Be sure to turn off the roof light so no one is cued your car door is ajar.
When you can go under the hood, remove the fuse - I think it is 15 - the fuse box cover has a diagram. I left the fuse out for a couple of hours and reinserted it. That broke the pattern for 7 months.
It is 89 degrees in chicago today, the alarm went off at the train station and I got a ticket for noise disturbance.
It's time to look at the fuse box again. i think extreme temps are the problem.

Remove the in-line fuse for the alarm. If the alarm faulted out it is activating the starter kill switch and the lights issue is the alarm trying to flash the lights.