2000-2001 Deville Door Panel
Removal:
1. Position window
fully downward and ensure manual lock knob is in unlock position.
2. Disconnect
locking clip at front of manual lock knob, by insertingsuitable flat
bladed tool into top service notch.
3. Remove manual
lock knob.
4. Remove inside
handle bezel by holding inside handle to open position, inserting
sutiable flat-bladed tool at front lower corner and prying outward.
5. Remove bezel.
6. Remove inside
door handle mounting screw.
7. Disconnect
eight retainers around outside edges of door trim panel using clip zip
tool No. J-36796, or equivalent.
8. Slide door trim
panel upwards to release alignment datums, eight retainers, armrest
steel retainer clips and inner belt mouldings (see fig #7 amd #8).
9. Disconnect
electrical connector(s).
10. Reverse
procedure to install.
Hope this help (remember rated this).
×