At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://fuse-box.info > Home > Chrysler
Fuse box diagram (location and assignment of electrical fuses and relays) for Chrysler Town & Country (Voyager) (2001, 2002, 2003, 2004, 2005, 2006, 2007).
First you will need to have the system evacuated so there is no longer refrigerant in the system
Next remove the rear seats or stow them. Then remove all the trim panels from the passenger rear of the vehicle. You will then be able to see the rear HVAC assembly.
Jack up the vehicle and support it properly. remove the nut that holds the rear lines to the expansion block.
Remove the heater core form the HVAC module with the cooling lines still attatched. Remove the HVAC module from the vehicle.
You will then be able to replace the rear evap core/tubes/expansion valve.
Get the kit from the dodge dealer. It will make life very easy.
Next remove the rear seats or stow them. Then remove all the trim panels from the passenger rear of the vehicle. You will then be able to see the rear HVAC assembly.
Jack up the vehicle and support it properly. remove the nut that holds the rear lines to the expansion block.
Remove the heater core form the HVAC module with the cooling lines still attatched. Remove the HVAC module from the vehicle.
You will then be able to replace the rear evap core/tubes/expansion valve.
Get the kit from the dodge dealer. It will make life very easy.
chrysler vehicles are known for the blower motor resistor going out, it is located on the blower box either behind or below the glove box. hope this helps
Raise the vehicle and support the fuel tank with a transmission jack.
Fuel line from the front of the tank
Ground strap
Inboard side of the fuel tank straps and front T strap fastener and lower the tank about 6 inches
Fuel lines from the fuel pump module
Fuel filter
Installation
is the reverse of removal. Tighten the fuel filter bolts to 40 inch
lbs. (4.5 Nm), the main tank straps to 40 ft. lbs. (54 Nm) and the T
strap to 250 inch lbs. (28 Nm).
×