How do you replace a flasher on a 2002 Dodge Stratus?

Left or right ? Do the hazard flashers work ? Probably the flasher is bad , without test the electrical circuit's that would be a guess .

Simple method without mystery:

1. Turn blinker flashers on;
2. Listen for clicking;
3. Find source of clicking. It is the flasher. :)

NOTE: Emergency flashers and blinkers usually use a separate flasher unit, but one is close to the other. If your blinkers do not work but your emergency flashers do, find the emergency flasher unit by finding the source of clicking, then locate the blinker flasher nearby. They will ALWAYS be underneath the dashboard on the driver side.

replace the flashers

what happens if you turn on the emergency flashers, reply to this feed with the answer to that and I'll assist you with your problem

The flasher relay is defective and needs replacing. It is located behind the center of the instrument panel.

auto zone take it there and they should change it

For the 2002 Dodge Stratus 3.0L SOHC V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back).......
|...1....3....5...|
|...2....4....6...|
......(front)

Distributor Connections:
..(back)
.....1
3........2
5........6
.....4
.(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Check your fuse on the driver's side fuse panel or replace plastic looking flasher unit.

I found this ad on ebay...can't beat it...best offer and free shipping!

http://cgi.ebay.com/ebaymotors/New-MOPAR-FLASHER-RELAY-Dodge-Stratus-Sebring-FREE-SHIP_W0QQitemZ290323751253QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item4398a4e155&_trksid=p4506.c0.m245&_trkparms=65%3A10%7C39%3A1%7C240%3A1318

Sounds like a throttle position sensor, but the comp should be coding the error in any case. How did you know to replace the crank and cam sensor?